Shop
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (*Use with 10mm Stainless Rod System)
$12.20 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels up to 7mm (1/4″) thick from sides. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
MULTI-POSITION TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 3mm Cables)
$12.40 Add to cartIdeal for supporting signs and graphic panels. For panels up to 7mm (1/4″) thick. Use with panels wider than the distance between cables. Use with 3mm (1/8″) Dia. Cables Suspensions.
IMPORTANT: Standard Set Screws (M6 x 0.7 x 8mm) included with CG12-3 supports can hold 3mm (1/8″) to 6mm (1/4″) thick substrates. To accommodate thiner or thicker substrates order suitable replacement Set Screws w/Teflon Tip.
-
MULTI-POSITION SUPPORT for 6mm Sloped Rod (Use with 3mm Cables)
$12.40 Add to cartUse with 3mm Cable Hanging System to create angled presentations or support custom design fixtures.
-
SUPPORT DOUBLE for P02 Boss (Use with 10mm Rods)
$12.40 Add to cartUse with 10mm (3/8″) Rod Suspension System to support wood panels and shelves, display cases, or clothing/hanging rails.
-
SUPPORT w/SCREW-CAP DOUBLE – For 6-7mm (15/64”-1/4″) thick panels with holes (*Use with 3mm Stainless Cables)
$12.40 Read moreUse for supporting signs and graphic panels 6-7mm (15/64”-1/4″) thick. Panel hole size diameter 7mm (1/4″). Use with 3mm (1/8″) Diameter Cable Suspensions in Stainless Steel Finish.
-
3/4″ Dia. x 1-7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 1/4″ thick panels/shelves)
$12.50 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
Easy Access Acrylic Pocket – Landscape. Insert Size: Letter/Legal
Price range: $12.51 through $27.27 Select options This product has multiple variants. The options may be chosen on the product page1/8″ Clear acrylic folded holder designed to take standard small prints and posters
-
WALL FIXING for 10mm (3/8″) Dia. Rods / Long – Locks at any angle
$12.60 Add to cartIdeal for supporting wall mounted rod displays. Use with 10mm (3/8″) Dia. Rods (*not included). Projects rod from wall 50mm (2″). Locks at any angle.
-
MULTI-POSITION SUPPORT SINGLE – For panels/shelves up to 7mm (1/4″) thick. (Use with 10mm Rods)
$12.60 Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 7mm (1/4″) thick. Adjustable to any angle. Can be locked into position. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
MULTI-POSITION SUPPORT SINGLE – For panels/shelves up to 10mm (3/8″) thick. (Use with 10mm Rods)
$12.60 Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 10mm (3/8″) thick. Adjustable to any angle. Can be locked into position. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
SHELF SUPPORT DOUBLE – For shelves up to 7mm (1/4″) thick. (Use with 10mm Rods)
Original price was: $14.00.$12.60Current price is: $12.60. Add to cartIdeal for supporting acrylic and glass shelves up to 7mm (1/4″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
SUPPORT w/SCREW-CAP – For 10mm (3/8″) thick panels with holes. (Use with 10mm Rods)
$12.60 Add to cartUse for supporting signs and graphic panels 10mm (3/8″) thick. Panel hole size diameter is 6mm (15/64″). Use with 10mm (3/8″) Dia. Rod Suspensions. *Supports for thicker panels are also available.
-
3/4″ Dia. x 1-7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 3/8″ thick panels/shelves)
$12.70 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
VERTICAL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (Use with 6mm Rods)
Original price was: $13.40.$12.73Current price is: $12.73. Add to cartFor panels up to 12.7mm (1/2″) thick. Use with 6mm (1/4″) Dia. Rod Suspensions. Ideal for supporting signs and graphic panels from sides
-
SHELF SUPPORT SINGLE – For shelves up to 12.7mm (1/2″) thick. (Use with 10mm Rods)
$12.80 Add to cartIdeal for supporting acrylic and glass shelves up to 12.7mm (1/2″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (*Use with 10mm Stainless Rod System)
$12.80 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels up to 7mm (1/4″) thick from sides. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
SHELF SUPPORT DOUBLE – For shelves up to 10mm (3/8″) thick. (*Use with 10mm Stainless Rod System)
$12.80 Add to cartIdeal for supporting acrylic and glass shelves up to 10mm (3/8″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
PANEL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick (*Use with 3mm Stainless Cables)
$12.80 Add to cartUse with 3mm Stainless Steel Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
1/4″ Clear Acrylic Sign Blanks – NO HOLES / QTY 12
Price range: $12.85 through $197.53 Select options This product has multiple variants. The options may be chosen on the product page1/4″ Clear acrylic sign blank with laser-cut polished edges – no holes. Ideal for creating low-cost acrylic signs with vinyl lettering or direct printing. It can also be used with a matching front piece of 1/8″ non-glare acrylic to create acrylic sign frames for interchangeable inserts. / 12 PCS BUNDLE.
*Acrylic Frames & Blanks are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
