-
SHELF SUPPORT SINGLE – For shelves up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.50 Add to cartIdeal for supporting acrylic and glass shelves
-
SHELF SUPPORT SINGLE – For shelves up to 10mm (3/8″) thick. (Use with 1.5mm Cables)
$6.20 Add to cartIdeal for supporting acrylic and glass shelves
*THIS ITEM REPLACES THE OLD PART NUMBERS: C1S-03
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.40 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT SINGLE – For panels up to 4mm (5/32″) thick. (Use with 1.5mm Cables)
$3.90 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT DOUBLE – For panels up to 4mm (5/32″) thick. (Use with 1.5mm Cables)
$5.10 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$8.90 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
SUPPORTS FOR DRILLED OR SLOTTED SHELF (Use with 1.5mm Cables)
$3.60 Add to cartIdeal for supporting acrylic and glass shelves
-
TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$7.20 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
IMPORTANT: Standard Set Screws (M6 x 0.7 x 6mm) included with CG09 supports can only hold 6-7mm (1/4″) thick substrates. For thiner material such as 3mm (1/8″) order replacement M6 x 0.7 x 10mm Set Screws w/Teflon Tip
-
VERTICAL SUPPORT SINGLE – For panels up to 10mm (3/8″) thick. (Use with 1.5mm Cables)
$6.20 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
*THIS ITEM REPLACES THE OLD PART NUMBERS: C1P-03
-
SUPPORT w/SCREW-CAP – For 5-6mm (3/16″-15/64″) thick panels with holes (Use with 1.5mm Cables)
$5.40 Add to cartIdeal for supporting signs and graphic panels
-
TOP PANEL SUPPORT – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.50 Add to cartIdeal for supporting overhead signs and graphic panels from top
-
TOP PANEL SUPPORT – For panels up to 10mm (3/8″) thick. (Use with 1.5mm Cables)
$8.60 Add to cartIdeal for supporting overhead signs and graphic panels from top
*THIS ITEM REPLACES THE OLD PART NUMBERS: C1P-07
-
SHELF SUPPORT DOUBLE – For shelves up to 10mm (3/8″) thick. (Use with 1.5mm Cables)
$10.20 Add to cartIdeal for supporting acrylic and glass shelves
*THIS ITEM REPLACES THE OLD PART NUMBERS: C1S-04
-
VERTICAL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (Use with 1.5mm Cables)
$9.50 Add to cartIdeal for supporting signs and graphic panels from sides
-
SHELF SUPPORT SINGLE – For shelves up to 12.7mm (1/2″) thick. (Use with 1.5mm Cables)
$10.20 Add to cartIdeal for supporting acrylic and glass shelves
-
MULTI-POSITION SUPPORT SINGLE FOR WOODEN SHELVES AND PANELS. (Use with 1.5mm Cables)
$13.60 Add to cartIdeal for supporting wooden shelves and panels
-
MULTI-POSITION SUPPORT SINGLE – For panels/shelves up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$10.80 Add to cartIdeal for supporting glass shelves, sloped acrylic shelves or angled presentations
-
SUPPORT w/SCREW-CAP – For 10mm (3/8″) thick panels with holes (Use with 1.5mm Cables)
$10.90 Add to cartIdeal for supporting signs and graphic panels
-
SHELF SUPPORT DOUBLE – For shelves up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$9.20 Add to cartIdeal for supporting acrylic and glass shelves
-
SUPPORT FOR PANELS WITH HOLES DOUBLE – For 10mm (3/8″) thick panels. (Use with 1.5mm Cables)
$15.40 Add to cartIdeal for supporting signs and graphic panels
OTHER SERVICES
Accepted Payment Methods
8:00am–4:30pm PST Mon-Fri
Nova Display Systems, Inc. | Official Web Store | 875 Wilson Street, Suite B, Eugene, OR 97402
Copyright © 2000-2023 Nova Display Systems Inc. All Rights Reserved. | Site Index