-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.40 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT SINGLE – For panels up to 4mm (5/32″) thick. (Use with 1.5mm Cables)
$3.90 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
1.5mm (1/16″) CABLE w/Ceiling Fixing – 2.0M (6′ 5-3/4″) Long
$8.64 Add to cartIncludes Cable and Top Fixing
-
VERTICAL SUPPORT DOUBLE – For panels up to 4mm (5/32″) thick. (Use with 1.5mm Cables)
$5.10 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
TOGGLE – End Fit
$2.25 Add to cartUse for fixing cables to rails/channels. Fits from the channel end. *Also used for mounting channels onto the wall brackets
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$8.90 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT SINGLE – For panels up to 10mm (3/8″) thick. (Use with 1.5mm Cables)
$6.20 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
*THIS ITEM REPLACES THE OLD PART NUMBERS: C1P-03
-
1.5M (4′ 11-1/16″) LONG 6mm (1/4″) DIA. THREADED ROD
$21.40 Add to cartLeft Handed M4 Threaded Rod at Both Ends
-
TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$7.20 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
PICTURE HOOK (Use with 1.5mm Cables)
$6.40 Add to cartIdeal for supporting framed artwork and photos
*THIS ITEM REPLACES THE OLD PART NUMBERS: C1F-25
-
SUPPORT w/SCREW-CAP – For 5-6mm (3/16″-15/64″) thick panels with holes (Use with 1.5mm Cables)
$5.40 Add to cartIdeal for supporting signs and graphic panels
-
SUPPORT SINGLE for P02 Boss (Use with 1.5mm Cables)
$4.60 Add to cartIdeal for supporting thick panels, shelves or display cases
-
1.5mm (1/16″) CABLE w/Quick-Fit Fixings – 4.0M (13′ 1-1/2″) Long
$29.16 Add to cartIncludes Fixings with Quick Fit Toggles for mounting on Rails/Channels
-
TOGGLE – Side Fit
$2.25 Add to cartUse for fixing cables to rails/channels. Fits directly onto channel opening. *Also used for mounting channels onto the wall brackets
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
$10.08 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (Use with 1.5mm Cables)
$8.55 Add to cartIdeal for supporting signs and graphic panels from sides
-
QUICK FIT TOGGLE
$4.00 Add to cartIdeal for supporting light weight graphic panels or banners from rails/channels. *Not recommended for heavy loads.
-
TOP/CEILING FIXING for 6mm (1/4″) Dia. Rods – Screw Fit
$6.90 Add to cartIncludes Fixing for Threaded Rod and Mounting Plug
OTHER SERVICES
Accepted Payment Methods
8:00am–4:30pm PST Mon-Fri
Nova Display Systems, Inc. | Official Web Store | 875 Wilson Street, Suite B, Eugene, OR 97402
Copyright © 2000-2022 Nova Display Systems Inc. All Rights Reserved. | Site Index