Home ❯ Display Systems & Installation Accessories ❯ Cable Display Systems ❯ 1.5mm Cable Display Systems ❯ Installation Accessories for 1.5mm Cable Display Systems
Showing all 20 results
Use for fixing cables to rails/channels. Fits from the channel end. *Also used for mounting channels onto the wall brackets
Ideal for powering the LED light pockets and cable lights
Use for suspending cables/rods with PA8 or PA9 toggles
Ideal for supporting light weight graphic panels or banners from rails/channels. *Not recommended for heavy loads.
Use for fixing cables to rails/channels. Fits directly onto channel opening. Also used for mounting channels onto the wall brackets.
*Use with lightweight items only. For items heavier than 80 lbs use PA8 Toggles.
Ideal for use as decorative support plate
Use as a replacement top-fixing for cables when connected to power
Use with PH1035, PH1005 or other double sided channel/extrusion
Use as a replacement bottom-fixing for cables when connected to power
Use as optional base support for 1.5mm cable sets (C100-2, C101-4, C113-3) and 3mm cable sets (C301-4).
Use for fixing cables to rails/channels. Fits directly onto channel opening.
Use with PH1005 channel/extrusion to finish the ends
Use as optional base support for 1.5mm cable sets (C100-2M, C101-4M) and 3mm cable sets (C301-4M).
Use with PH1035 channel/extrusion to finish the ends
Nova Display Systems, Inc. | Official Web Store | 875 Wilson Street, Suite B, Eugene, OR 97402Copyright © 2000-2023 Nova Display Systems Inc. All Rights Reserved. | Site Index