10mm Rods & Fixings / Stainless Steel
-
50mm (2″) Heavy Duty Ceiling Support *Stainless Steel*
Original price was: $16.40.$13.94Current price is: $13.94. Add to cartUse as optional base support for 1.5mm cable sets in stainless steel (C100-2M/SS, C101-4M/SS), 3mm cable sets in stainless steel (C301-4M/SS), and 10mm rod fixings in stainless steel (RC-10/SS, and RCF-10/SS).
-
CEILING-TO-FLOOR ROD FIXING KIT (*Use with 10mm Stainless Rod System)
$28.90 Add to cartIncludes Top/Ceiling Fixing with standard base support for right-hand M6 threaded rods and Bottom/Floor Fixing with Spring Tensioner. Use with 10mm (3/8″) Diameter Rod Suspensions in Stainless Steel Finish for ceiling suspensions or wall projecting installations (*not included). Optional base supports in 25mm, 38mm or 50mm diameters are available.
-
1.5M (4′ 11-1/16″) LONG 10mm (3/8″) Dia. Threaded Rod (*Stainless Steel)
$36.90 Add to cartRight Handed M6 Threaded Rod at Both Ends
-
1.0M (3′ 3-3/8″) LONG 10mm (3/8″) Dia. Threaded Rod (*Stainless Steel)
$34.20 Add to cartRight Handed M6 Threaded Rod at Both Ends
-
25mm (1″) Base Support *Stainless Steel*
Original price was: $5.90.$4.43Current price is: $4.43. Add to cartUse as optional base support for 1.5mm cable sets in stainless steel (C100-2M/SS, C101-4M/SS), 3mm cable sets in stainless steel (C301-4M/SS), and 10mm rod fixings in stainless steel (RC-10/SS, and RCF-10/SS).
-
DECORATIVE END CAP for 10mm (3/8″) Dia. Rods (*Use with 10mm Stainless Rod System)
Original price was: $4.60.$3.91Current price is: $3.91. Add to cartUse with 10mm (3/8″) Dia. Rods to finish the ends
-
38mm (1-1/2″) Base Support *Stainless Steel*
Original price was: $9.80.$8.33Current price is: $8.33. Add to cartUse as optional base support for 1.5mm cable sets in stainless steel (C100-2M/SS, C101-4M/SS), 3mm cable sets in stainless steel (C301-4M/SS), and 10mm rod fixings in stainless steel (RC-10/SS, and RCF-10/SS).
-
0.5M (1′ 7-11/16″) LONG 10mm (3/8″) Dia. Threaded Rod (*Stainless Steel)
$28.50 Add to cartRight Handed M6 Threaded Rod at Both Ends
-
TOP/CEILING FIXING for 10mm (3/8″) Dia. Rods – Screw Fit (*Use with 10mm Stainless Rod System)
$8.40 Add to cartIncludes Top Fixing with standard base support for right-hand M6 threaded rods. Use with 10mm (3/8″) Diameter Rod Suspensions in Stainless Steel Finish for ceiling suspensions or wall projecting installations (*not included). Optional base supports in 25mm, 38mm or 50mm diameters are available.
-
WALL FIXING for 10mm (3/8″) Dia. Rods (*Use with 10mm Stainless Rod System)
Original price was: $9.20.$6.90Current price is: $6.90. Add to cartIdeal for supporting wall mounted rod displays, signs, or other applications. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish. Includes Wall Plug and Wall Coupling Cap. Supported rods project from wall 25mm (1″) on center.
-
WALL FIXING / SHORT for 10mm (3/8″) Dia. Rods (*Use with 10mm Stainless Rod System)
Original price was: $8.60.$7.74Current price is: $7.74. Add to cartIdeal for supporting wall mounted rod displays, signs, or other applications. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish. Includes Wall Plug and Wall Coupling Cap. Supported rods project from wall 16mm (5/8″) on center.
-
CEILING-TO-FLOOR ROD FIXING KIT with 10mm Rods – 3M (9’ 10”) Length
Original price was: $102.70.$87.30Current price is: $87.30. Add to cartCeiling-to-Floor Fixing Kit with 10mm Rods – Includes RCF-10/SS Top/Bottom Fixings with Spring Tensioner (1 ea) and RD10-1.5M 10mm (3/8″) diameter threaded rods (2 ea). Use with ceiling-to-floor suspended application — Join to 3M (9’ 10”) total height and cut to size on-site during installation. Use with Optional Base Supports in 25mm, 38mm or 50mm diameters.
-
0.5M (1′ 7-11/16″) LONG 10mm (3/8″) Dia. Threaded Rod w/Dome End (*Stainless Steel)
Original price was: $28.50.$21.38Current price is: $21.38. Add to cartRight Handed M6 Threaded Rod at One End – Other End Dome Shaped.
-
WALL-TO-WALL FIXING KIT with 10mm Rod – 1.0M (3’ 3-3/8”) Length
Original price was: $52.60.$44.71Current price is: $44.71. Add to cart -
WALL-TO-WALL FIXING KIT with 10mm Rod and End Caps – 1.5M (4′ 11-1/16”) Length
Original price was: $64.50.$54.83Current price is: $54.83. Add to cart -
WALL-TO-WALL FIXING KIT with 10mm Rod and End Caps (Short Projection) – 1.5M (4′ 11-1/16”) Length
Original price was: $63.30.$53.81Current price is: $53.81. Add to cartWall-to-Wall Rod Fixing Kit – Includes two RWF-10-25/SS Wall Fixings (2 ea), RD10-1.5M 10mm (3/8″) diameter threaded rod (1 ea), and REC-10/SS Decorative End Caps (2 ea). Use with wall-to-wall suspended applications. Supported rods project from wall 16mm (5/8″) on center.
-
WALL-TO-WALL FIXING KIT with 10mm Rod (Short Projection) – 1.0M (3’ 3-3/8”) Length
Original price was: $51.40.$43.69Current price is: $43.69. Add to cartWall-to-Wall Rod Fixing Kit – Includes two RWF-10-25/SS Wall Fixings and RD10-1.0M 10mm (3/8″) diameter threaded rod. Use with wall-to-wall suspended applications (finish ends or cut rod to size). Supported rods project from wall 16mm (5/8″) on center.
-
CEILING-TO-FLOOR ADJUSTABLE ROD FIXING KIT with 10mm Rods – 4.5M (14’ 9”) Length
Original price was: $165.45.$140.63Current price is: $140.63. Add to cartCeiling-to-Floor Adjustable Fixing Kit with 10mm Rods – Includes KCB-38 38mm Diameter Angle Base Support with Ball-Joint Swivel Coupling for Ceiling (1 ea), PSM-Collar Ring (1 ea), RCF-10/SS Top/Bottom Fixings with Spring Tensioner (1 ea), and RD10-1.5M 10mm (3/8″) diameter threaded rods (3 ea). Use with sloped ceiling-to-floor suspended applications — Join to 4.5M (14’ 9”) total height and cut to size on-site during installation. Use with Optional Base Support in 50mm diameter.
-
CEILING-TO-FLOOR ROD FIXING KIT with 10mm Rods – 4.5M (14’ 9”) Length
Original price was: $139.60.$118.66Current price is: $118.66. Add to cartCeiling-to-Floor Fixing Kit with 10mm Rods – Includes RCF-10/SS Top/Bottom Fixings with Spring Tensioner (1 ea) and RD10-1.5M 10mm (3/8″) diameter threaded rods (3 ea). Use with ceiling-to-floor suspended application — Join to 4.5M (14’ 9”) total height and cut to size on-site during installation. Use with Optional Base Supports in 25mm, 38mm or 50mm diameters.
-
TOP/CEILING ADJUSTABLE FIXING KIT with 10mm Rod – 1.5M (4′ 11-1/16”) Length
Original price was: $75.75.$64.39Current price is: $64.39. Add to cartTop/Ceiling Adjustable Fixing Kit with 10mm Rods – Includes KCB-38 38mm Diameter Angle Base Support with Ball-Joint Swivel Coupling (1 ea), PSM-Collar Ring (1 ea), RC-10/SS Top Fixing (1 ea), RD10-1.5M 10mm (3/8″) diameter threaded rod (1 ea), and REC-10/SS decorative end cap (1 ea). Use with sloped ceiling or angled wall suspended applications. Optional Base Support 50mm diameters are available.
