Home ❯ rod suspension display systems ❯ Page 4
rod suspension display systems
Showing 61–80 of 233 resultsSorted by popularity
-
MULTI-POSITION TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
$13.40 Add to cartIdeal for supporting signs and graphic panels. For panels up to 7mm (1/4″) thick. Use with panels wider than the distance between cables. Use with 6mm (1/4″) Dia. Rod Suspensions.
IMPORTANT: Standard Set Screws (M6 x 0.7 x 8mm) included with RG12 supports can hold 3mm (1/8″) to 6mm (1/4″) thick substrates. To accommodate thiner or thicker substrates order suitable replacement Set Screws w/Teflon Tip.
-
MULTI-POSITION SUPPORT SINGLE for Wooden Shelves and Panels. (Use with 6mm Rods)
$14.20 Add to cartUse for supporting wooden shelves and panels. Adjustable to any angle. Can be locked into position. Use P08 Screw/Retainer with 6mm (15/64″) drilled glass shelves. Use with 6mm (1/4″) Dia. Rod Suspensions.
-
SUPPORT for Drilled or Slotted Shelf (*Use with 10mm Rod System)
$4.40 Add to cartUse for supporting drilled or slotted acrylic and glass shelves. Located under shelf. Hole Diameter – 12.5mm (1/2″). Use with 10mm (3/8″) Dia. Rod Display Systems
-
Cable Suspended Glass Shelving Kit #KSI-003
From: $325.40 Select optionsSupplied with 1.5mm cable suspension hardware, shelf supports, and tempered glass shelves.
*Cable Suspension Kits with Acrylic Shelves are also available – #KSI-003PLEX.
-
WALL FIXING / SHORT for 10mm (3/8″) Dia. Rods (*Use with 10mm Stainless Rod System)
$9.80 Add to cartIdeal for supporting wall mounted rod displays, signs, or other applications. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish. Includes Wall Plug and Wall Coupling Cap. Supported rods project from wall 16mm (5/8″) on center.
-
0.5M (1′ 7-11/16″) LONG 6mm (1/4″) Dia. Non-Threaded Rod
$6.80 Add to cartNon-Threaded Rod – Cut to any length
-
WALL FIXING for 10mm (3/8″) Dia. Rods (*Use with 10mm Stainless Rod System)
$8.20 Add to cartIdeal for supporting wall mounted rod displays, signs, or other applications. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish. Includes Wall Plug and Wall Coupling Cap. Supported rods project from wall 25mm (1″) on center.
-
VERTICAL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (*Use with 10mm Stainless Rod System)
$13.40 Add to cartIdeal for supporting acrylic screens, signs and graphic panels up to 12.7mm (1/2″) thick from sides. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
MULTI-POSITION SUPPORT for 10mm Rod (Use with 10mm Rods)
$9.80 Add to cartUse with 10mm (3/8″) Rod Suspension System to create angled presentations or support custom design fixtures.
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
$14.90Original price was: $14.90.$13.41Current price is: $13.41. Add to cartFor panels up to 7mm (1/4″) thick. Use with 6mm (1/4″) Dia. Rod Suspensions. Ideal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT DOUBLE – For panels up to 12.7mm (1/2″) thick. (*Use with 10mm Stainless Rod System)
$14.40 Add to cartIdeal for supporting acrylic screens, signs and graphic panels up to 12.7mm (1/2″) thick from sides. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
MULTI-POSITION SUPPORT DOUBLE – For panels/shelves up to 10mm (3/8″) thick. (Use with 10mm Rods)
$18.60 Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 10mm (3/8″) thick. Adjustable to any angle. It can be locked into position. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (Use with 10mm Rods)
$15.60 Add to cartFor panels up to 7mm (1/4″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions. Ideal for supporting acrylic pockets, signs and graphic panels from sides
-
CEILING-TO-FLOOR ROD FIXING KIT with 10mm Rods – 3M (9’ 10”) Length
$114.70 Add to cartCeiling-to-Floor Fixing Kit with 10mm Rods – Includes RCF-10/SS Top/Bottom Fixings with Spring Tensioner (1 ea) and RD10-1.5M 10mm (3/8″) diameter threaded rods (2 ea). Use with ceiling-to-floor suspended application — Join to 3M (9’ 10”) total height and cut to size on-site during installation. Use with Optional Base Supports in 25mm, 38mm or 50mm diameters.
-
WALL FIXING FOR 6mm (1/4″) DIA. RODS / LONG – Locks at any angle
$12.20 Add to cartIdeal for supporting wall mounted rod displays. Use with 6mm (1/4″) Dia. Rods (*not included). Projects rod from wall 46mm (1-13/16″). Locks at any angle.
-
SHELF SUPPORT SINGLE – For shelves up to 10mm (3/8″) thick. (Use with 10mm Rods)
$10.90Original price was: $10.90.$9.18Current price is: $9.18. Add to cartIdeal for supporting acrylic and glass shelves up to 10mm (3/8″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
MULTI-POSITION SUPPORT SINGLE – For panels/shelves up to 7mm (1/4″) thick. (Use with 10mm Rods)
$12.60 Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 7mm (1/4″) thick. Adjustable to any angle. Can be locked into position. Use with 10mm (3/8″) Dia. Rod Suspensions.
SEARCH BY KEYWORD/SKU
STORE CATEGORIES
- Specials & Promo Discounts
- ★ Clearance & Overstock Items
- Wall Display Ideas | Products
- Wall Displays | Project Details & Downloads
- Product Bundles | Bulk Savings
- Display Solutions & Design Ideas
- Display Systems & Installation Accessories
- Cable Display Systems
- Rod Display Systems
- Rail/Track Display Systems
- Sign & Panel Support Systems
- Aluminum Modular Display Systems
- Accessories for Cable/Rod & Rail
- Acrylic Products
- Signware Products & Accessories
- Hardware & Miscellaneous
- Other Products & Services



















