rod display system
-
TOGGLE – Side Fit
$2.25 Add to cartUse for fixing cables to rails/channels. Fits directly onto channel opening. Also used for mounting channels onto the wall brackets.
*Use with lightweight items only. For items heavier than 80 lbs use PA8 Toggles.
-
TOP/CEILING FIXING for 6mm (1/4″) Dia. Rods – Screw Fit
Original price was: $6.40.$5.76Current price is: $5.76. Add to cartIncludes Top Fixing with base support for left-hand M4 threaded rods. Use with 6mm (1/4″) diameter rods for ceiling suspensions or wall projecting installations (*not included).
-
SHELF SUPPORT SINGLE – For shelves up to 12.7mm (1/2″) thick. (Use with 6mm Rods)
Original price was: $11.50.$10.35Current price is: $10.35. Add to cartUse with 6mm (1/4″) Dia. Rod Suspension System to support acrylic and glass shelves up to 12.7mm (1/2″) thick
-
SUPPORT for Drilled or Slotted Shelf (Use with 6mm Rods)
Original price was: $3.40.$3.06Current price is: $3.06. Add to cartUse for supporting drilled or slotted acrylic and glass shelves. Located under the shelf. Hole Diameter – 10mm (3/8″). Use with 6mm (1/4″) Dia Rod Suspensions.
-
VERTICAL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (Use with 10mm Rods)
Original price was: $9.50.$8.55Current price is: $8.55. Add to cartFor panels up to 12.7mm (1/2″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions. Ideal for supporting signs and graphic panels from sides
-
TOP/CEILING FIXING FOR 10mm (3/8″) DIA. RODS – Screw Fit
Original price was: $6.90.$6.21Current price is: $6.21. Add to cartIncludes Top Fixing with base support for right-hand M6 threaded rods. Use with 10mm (3/8″) diameter rods for ceiling suspensions or wall projecting installations (*not included).
-
MULTI-POSITION SUPPORT DOUBLE – For panels/shelves up to 10mm (3/8″) thick. (Use with 6mm Rods)
Original price was: $17.20.$15.48Current price is: $15.48. Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 10mm (3/8″) thick. Adjustable to any angle. Can be locked into position. Use with 6mm (1/4″) Dia. Rod Suspensions.
-
0.5M (1′ 7-11/16″) LONG 10mm (3/8″) Dia. Threaded Rod
Original price was: $16.40.$14.76Current price is: $14.76. Add to cartRight Handed M6 Threaded Rod at Both Ends
-
CEILING-TO-FLOOR ROD FIXING KIT (*Use with 10mm Stainless Rod System)
Original price was: $25.60.$23.04Current price is: $23.04. Add to cartIncludes Top/Ceiling Fixing with standard base support for right-hand M6 threaded rods and Bottom/Floor Fixing with Spring Tensioner. Use with 10mm (3/8″) Diameter Rod Suspensions in Stainless Steel Finish for ceiling suspensions or wall projecting installations (*not included). Optional base supports in 25mm, 38mm or 50mm diameters are available.
-
1.0M (3′ 3-3/8″) LONG 6mm (1/4″) Dia. Non-Threaded Rod
Original price was: $10.60.$9.54Current price is: $9.54. Add to cartNon-Threaded Rod – Cut to any length
-
1.5M (4′ 11-1/16″) LONG 10mm (3/8″) Dia. Threaded Rod (*Stainless Steel)
Original price was: $38.00.$34.20Current price is: $34.20. Add to cartRight Handed M6 Threaded Rod at Both Ends
-
SUPPORT SINGLE for 6mm Rod
$7.50 Add to cartUse with 6mm (1/4″) Rod Suspension System to support hook-on acrylic holders, fabrics, banners or signs on horizontal rods.
-
DECORATIVE END CAP for 10mm (3/8″) Dia. Rods
Original price was: $4.40.$3.96Current price is: $3.96. Add to cartUse with 10mm (3/8″) Dia. Rods to finish the ends
-
SUPPORT w/SCREW-CAP – For 5-6mm (3/16″-15/64″) thick panels with holes. (Use with 6mm Rods)
Original price was: $9.10.$7.74Current price is: $7.74. Add to cartUse for supporting signs and graphic panels 5-6mm (3/16″-15/64″) thick. Panel hole size diameter 6mm (15/64″). Use with 6mm (1/4″) Dia. Rod Suspensions.
-
MULTI-POSITION SUPPORT SINGLE – For panels/shelves up to 10mm (3/8″) thick. (Use with 10mm Rods)
Original price was: $9.40.$8.46Current price is: $8.46. Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 10mm (3/8″) thick. Adjustable to any angle. Can be locked into position. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
DECORATIVE END CAP for 10mm (3/8″) Dia. Rods (*Use with 10mm Stainless Rod System)
Original price was: $4.60.$4.14Current price is: $4.14. Add to cartUse with 10mm (3/8″) Dia. Rods to finish the ends
-
MULTI-POSITION SUPPORT SINGLE FOR WOODEN SHELVES AND PANELS. (Use with 10mm Rods)
Original price was: $8.90.$8.01Current price is: $8.01. Add to cartUse for supporting wooden shelves and panels. Adjustable to any angle. It can be locked into position. Use P08 Screw/Retainer with 6mm (15/64″) drilled glass shelves. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
1.0M (3′ 3-3/8″) LONG 10mm (3/8″) Dia. Threaded Rod (*Stainless Steel)
Original price was: $26.90.$24.21Current price is: $24.21. Add to cartRight Handed M6 Threaded Rod at Both Ends
-
TOP PANEL SUPPORT – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
Original price was: $6.80.$6.12Current price is: $6.12. Add to cartIdeal for supporting overhead signs and graphic panels from top. For panels up to 7mm (1/4″) thick. Use with 6mm (1/4″) Dia. Rod Suspensions.
-
0.5M (1′ 7-11/16″) LONG 10mm (3/8″) Dia. Threaded Rod (*Stainless Steel)
Original price was: $16.40.$14.76Current price is: $14.76. Add to cartRight Handed M6 Threaded Rod at Both Ends
