Product Description
1.0M (3′ 3-3/8″) Long 6mm (1/4″) Dia. Non-Threaded Rod
The R1000P stainless steel rod comes with non-threaded ends. Fix rods back to wall using RP, RS03-P02, or with WM11 wall fixings. Cut rods to any length.
The 6mm rod system comprises stainless steel rods with left-hand M4 threads and non-threaded options. The threaded rods have a male thread at one end and a female thread at the other, allowing them to be screwed into the top fixing or joined together to create longer lengths. When connected, the rods appear as a single continuous unit. To achieve the required overall length, the rod can be cut at the bottom using a hacksaw or grinding wheel.
The 6mm diameter rods are available in standard lengths of 1.5m (4′ 11-1/16″) threaded on both ends, 1m (3′ 3-1/32″) non-threaded, and 0.5m (1′ 7-11/16″) threaded on one end and finished on the other end. Use a combination of multiple threaded rods to achieve any desired length. When properly installed, the rods with ceiling fixings can support up to 200 kg (441 lbs) per fixing point. Choose from a range of standard suspension kits and individual components for the 6mm diameter rod system by following the link below.