Home ❯ Display Systems & Installation Accessories ❯ Page 24
Display Systems & Installation Accessories
Showing 461–480 of 824 resultsSorted by popularity
-
3/4″ x 1-3/4″ EDGE-GRIP PANEL SUPPORT – Satin Clear Anodized Aluminum (w/Front Set Screw)
$9.50 Add to cartMade of Aluminum with Satin Anodized Finish. Includes Edge-Grip Support and Coupling Anchor.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
1/4″ Clear Acrylic Back Panel – with Holes for M4 Studs
$23.58 – $68.04Price range: $23.58 through $68.04 Select options This product has multiple variants. The options may be chosen on the product page1/4″ Clear acrylic back panel with polished edges – with holes for M4 Studs. *Always use with a matching front piece of 1/8″ non-glare acrylic.
Note: Acrylic panels outside dimensions are larger then specified insert format by 1.25″ on all sides. Panels are listed by insert size.
*Acrylic Frames & Blanks are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
1/2″ PANEL HOLDER – 72 Inch Long
$44.24 Add to cart72″ long aluminum extrusion
*Aluminum Modular Extrusions/Profiles & Accessories are Made-to-Order Only (punched, drilled, machined, cut, etc.) – Both standard and custom size profiles are cut to specified lengths when we process the order. All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
PH1013 HORIZONTAL EXTRUSION – 72 Inch Long
$40.18 Add to cart72″ long aluminum extrusion
*Aluminum Modular Extrusions/Profiles & Accessories are Made-to-Order Only (punched, drilled, machined, cut, etc.) – Both standard and custom size profiles are cut to specified lengths when we process the order. All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
3/4″ x 2″ EDGE-GRIP PANEL SUPPORT – Satin Clear Anodized Aluminum (w/Front Set Screw)
$10.50 Add to cartMade of Aluminum with Satin Anodized Finish. Includes Edge-Grip Support and Coupling Anchor.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
10mm (3/8″) DIA. SCREW CAP SET for 6.5-7mm Thick Panels
$2.20 Add to cartMade of Solid Aluminum with Satin Anodized Finish. Includes Threaded Deco Screw-Caps with M4 Stud.
-
1.5mm Cable Suspension Kit with Adjustable Angle Top/Bottom Fixings – 4.0M (13′ 1-1/2″) Long (*Stainless Steel)
$72.80 Add to cartCable Suspension Kit includes: Cable, Spring Tensioner and Adjustable Top/Bottom Fixings with 38mm (1-1/2″) Dia. Bases – Optional Base Supports in 50mm diameter are also available. Cable Projection from Wall – 65mm (2-1/2″).
-
PLASTIC END CAP – PH1005/1045 & PL1012
$2.38 Add to cartFor use with PH1005, PH1045 and PL1012 extrusions
-
MULTI-POSITION SUPPORT DOUBLE – For panels/shelves up to 7mm (1/4″) thick. (Use with 3mm Cables)
$19.80 Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 7mm (1/4″) thick. Adjustable to any angle. Can be locked into position. Use with 3mm (1/8″) Dia. Cables Suspensions.
-
ALUMINUM END CAPS – For PH1035
$2.46 Add to cartUse with PH1035 channel/extrusion to finish the ends
-
1.5mm Cable with Top-Crimp – 4M (13′ 1-1/2″) Long
$5.20 Add to cartUse as cable replacement for overhead or ceiling-to-floor cable fixing kits.
-
CEILING-TO-FLOOR ROD FIXING KIT with 10mm Rods – 4.5M (14’ 9”) Length
$157.60 Add to cartCeiling-to-Floor Fixing Kit with 10mm Rods – Includes RCF-10/SS Top/Bottom Fixings with Spring Tensioner (1 ea) and RD10-1.5M 10mm (3/8″) diameter threaded rods (3 ea). Use with ceiling-to-floor suspended application — Join to 4.5M (14’ 9”) total height and cut to size on-site during installation. Use with Optional Base Supports in 25mm, 38mm or 50mm diameters.
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set / Stainless Steel (For 1/4″ thick panels/shelves)
$7.40 Add to cartMade of (#SS303) Stainless Steel with Brushed Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
SHELF SUPPORT DOUBLE – For shelves up to 10mm (3/8″) thick. (*Use with 10mm Stainless Rod System)
$12.80 Add to cartIdeal for supporting acrylic and glass shelves up to 10mm (3/8″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
1/4″ Angled Acrylic Shelf – CLEAR. Size: 12″x14″/12″x24″
$54.98 – $90.22Price range: $54.98 through $90.22 Select options This product has multiple variants. The options may be chosen on the product page1/4″ Clear acrylic shelf with 1.25″ Front Lip & Back Support Panel – Polished edges
*Acrylic Shelves are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
SEARCH BY KEYWORD/SKU
STORE CATEGORIES
- Specials & Promo Discounts
- ★ Clearance & Overstock Items
- Wall Display Ideas | Products
- Wall Displays | Project Details & Downloads
- Product Bundles | Bulk Savings
- Display Solutions & Design Ideas
- Display Systems & Installation Accessories
- Cable Display Systems
- Rod Display Systems
- Rail/Track Display Systems
- Sign & Panel Support Systems
- Aluminum Modular Display Systems
- Accessories for Cable/Rod & Rail
- Acrylic Products
- Signware Products & Accessories
- Hardware & Miscellaneous
- Other Products & Services



















