-
SHELF SUPPORT SINGLE – For shelves up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.50 Add to cartIdeal for supporting acrylic and glass shelves
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.40 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
TOGGLE – End Fit
$2.25 Add to cartUse for fixing cables to rails/channels. Fits from the channel end. *Also used for mounting channels onto the wall brackets
-
SUPPORT for Drilled or Slotted Shelf (Use with 3mm Cables)
$4.40 Add to cartUse for supporting drilled or slotted acrylic and glass shelves.
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$8.90 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
SUPPORTS FOR DRILLED OR SLOTTED SHELF (Use with 1.5mm Cables)
$3.60 Add to cartIdeal for supporting acrylic and glass shelves
-
TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$7.20 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
IMPORTANT: Standard Set Screws (M6 x 0.7 x 6mm) included with CG09 supports can only hold 6-7mm (1/4″) thick substrates. For thiner material such as 3mm (1/8″) order replacement M6 x 0.7 x 10mm Set Screws w/Teflon Tip
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 3mm Cables)
$8.60 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
SUPPORT for Drilled or Slotted Shelf (*Use with 3mm Stainless Cables)
$4.90 Add to cartUse for supporting drilled or slotted acrylic and glass shelves.
-
PICTURE HOOK (Use with 1.5mm Cables)
$6.40 Add to cartIdeal for supporting framed artwork and photos
*THIS ITEM REPLACES THE OLD PART NUMBERS: C1F-25
-
5/8″ Dia. x 5/8″ PROJECTING SHELF/PANEL SUPPORT – BRASS w/SATIN CHROME
$3.90 Add to cartMade of Solid Brass with Satin Chrome Finish.
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set (For 1/4″ thick panels/shelves)
$7.40 Add to cartMade of Aluminum with Satin Anodized Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
SHELF SUPPORT SINGLE – For shelves up to 12.7mm (1/2″) thick. (Use with 3mm Cables)
$11.90 Add to cartIdeal for supporting acrylic and glass shelves
-
3/4″ Dia. x 7/8″ PROJECTING SUPPORT – Aluminum w/Satin Anodized (For 1/4″ thick panels/shelves)
$5.20 Add to cartMade of Aluminum with Satin Anodized Finish. The base is threaded to accept M6 Stud-Cap or Bolt.
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick (*Use with 1.5mm Stainless Cables)
$6.48 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (Use with 3mm Cables)
$11.90 Add to cartIdeal for supporting signs and graphic panels from sides
-
TOGGLE – Side Fit
$2.25 Add to cartUse for fixing cables to rails/channels. Fits directly onto channel opening. Also used for mounting channels onto the wall brackets.
*Use with lightweight items only. For items heavier than 80 lbs use PA8 Toggles.
-
VERTICAL SUPPORT DOUBLE – For panels up to 10mm (3/8″) thick (*Use with 1.5mm Stainless Cables)
$12.80 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
$11.20 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (Use with 1.5mm Cables)
$9.50 Add to cartIdeal for supporting signs and graphic panels from sides
OTHER SERVICES
Accepted Payment Methods
8:00am–4:30pm PST Mon-Fri
Nova Display Systems, Inc. | Official Web Store | 875 Wilson Street, Suite B, Eugene, OR 97402
Copyright © 2000-2023 Nova Display Systems Inc. All Rights Reserved. | Site Index