Rod Suspended Acrylic Poster Display Kit #KASP-065
Supplied with 1/4″ thick clear back and 1/8″ non-glare front acrylic panels designed to take standard prints, posters, or graphics up to 135 gsm (1 mm, 1/32″) thickness. Optional graphic inserts printed on satin polyester base film are available.
Wall Mounted on 6mm Rod System (each cable is 59 inches long / cut to needed size)
HARDWARE: WM11 – Rod Wall Fixing (4 ea) P01 – Decorative Base Plate (4 ea) R1500 – 1.5m (4′ 11-1/16″) Threaded Rod (2 ea) RS13/S-3/8 – Panel Support w/Holes Single (4 ea) REC – Decorative End Cup for Rods (4 ea) P50-TWL – Screw Set for Wall Mounting (4 ea) 38CLIP – 3/8″ Clear Clip (2 ea)
ACCESSORIES: Acrylic Panels w/Arched Top & Bottom 14ASP-2CR-*INSERT SIZE*/H/S – 1/4″ Clear Acrylic Back Panel (1 ea) 18ASP-2CR-*INSERT SIZE*/H/S – 1/8″ Non-Glare Acrylic Front Panel (1 ea)
(*Choose Panel Size)
AVAILABILITY: 3-7 Bus. Days (Fabrication and Delivery Time)
FINISHES: Mounting Hardware is supplied in a satin chrome finish as standard, other finishes on request. The Frameless Graphic Panels are made of high-quality 1/4″ thick clear and 1/8″ non-glare acrylic.
CUSTOMIZATIONS: To customize your own Display Kit, please send us a short description or graphical attachment. We custom fabricate Frameless Graphic Panels in clear, non-glare or frosted acrylic in sizes up to 24″ x 36″. All custom orders are subject to a minimum order requirement, please contact our sales representatives for more information at 800-753-9688.
INSTALLATION NOTES: Assembly required.
* Oversize Poster Display Kits will be palletized and shipped via motor freight. Additional Freight & Handling Surcharge may apply. We suggest ordering a few units at once in order to save on shipping cost.
We offer Multiple Unit Discounts (Mix & Match). Call 800-753-9688 for details.
The number one problem with acrylic is the use of incorrect cleaners. Please never use cleaners containing ammonia, glass cleaners and furniture polish such as Fantastik, Tilex, Windex, or Clorox, they will all harm your new piece of acrylic. Use mild soap and water to clean acrylic products or only products specifically recommended for cleaning acrylic such as Craftics, Novus, or other Rated Anti-Static Cleaner & Polish for Plastics. Use micro-fiber disposable low lint cloths that are specially designed for cleaning acrylic and other plastic. Never use a dry cloth or your hand to clean your acrylic. Using the wrong cleaner can cause damage to acrylic products that can occur within minutes or be delayed weeks or even months. Repeated use of the wrong cleaners will weaken the structural joints and cause cracking to occur. Be careful during install, dropping your acrylic can cause cracking.
Acrylic is not as rigid as glass or metals. Large, flat acrylic sheets, if insufficiently supported, may deform permanently due to continuous loads or even their own weight. Acrylic sheet can be used at temperatures from -30°F (-34°C) up to +190°F (+88°C), depending on the application. It is recommended that temperatures not exceed 160°F (71°C) for continuous service, or 190°F (88°C) for short, intermittent use. Components should not be exposed to high heat sources such as high wattage incandescent lamps, unless the finished product is ventilated to permit the dissipation of heat. Acrylic sheet is a combustible thermoplastic. Precautions should be taken to protect this material from flames and high heat sources.
Acrylic/Plastic Cleaning Kit
Cleaner & Polisher — cleans and brightens acrylic and all hard plastic surfaces. Leaves a shiny polished surface that resists dust and fingerprints. Contains no abrasives or harsh chemicals. Cleans, glazes, and eliminates static charge all in one operation. Recommended for: Acrylic, Plexiglass, Lexan, Vinyl, Glass, and all hard plastics. Use disposable or reusable cleaning cloths.