Shop
-
SUPPORT w/SCREW-CAP – For 6-7mm (15/64″-1/4″) thick panels with holes. (*Use with 10mm Stainless Rod System)
$9.80 Add to cartUse for supporting signs, graphic panels, and decorative screens 6-7mm (15/64”-1/4″) thick. Panel hole size diameter 7mm (1/4″). Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish. *Supports for thicker panels are also available.
-
SUPPORT DOUBLE for P07/SS Boss (*Use with 10mm Stainless Rod System)
$9.80 Add to cartUse with 10mm Rod Suspension System in stainless steel finish to support wood panels and shelves, display cases, or clothing/hanging rails.
-
WALL FIXING / SHORT for 10mm (3/8″) Dia. Rods (*Use with 10mm Stainless Rod System)
$9.80 Add to cartIdeal for supporting wall mounted rod displays, signs, or other applications. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish. Includes Wall Plug and Wall Coupling Cap. Supported rods project from wall 16mm (5/8″) on center.
-
SUPPORT w/SCREW-CAP – For 12.7mm (1/2″) thick panels with holes (Use with 1.5mm Cables)
$9.90 Add to cartUse for supporting signs and graphic panels 12.7mm (1/2″) thick. Panel hole size diameter 6mm (15/64″). Use with 1.5mm (1/16″) Dia. Cables Suspensions.
-
SUPPORT w/SCREW-CAP – For panels up to 5-6mm (3/16″-15/64″) thick. (Use with 10mm Rods)
$9.90 Add to cartUse for supporting signs and graphic panels 5-6mm (3/16″-15/64″) thick. Panel hole size diameter 6mm (15/64″). Use with 10mm (3/8″) Dia. Rod Suspensions. *Supports for thicker panels are also available.
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
$9.90 Add to cartFor panels up to 7mm (1/4″) thick. Use with 6mm (1/4″) Dia. Rod Suspensions. Ideal for supporting acrylic pockets, signs and graphic panels from sides
-
0.5M (1′ 7-11/16″) LONG 6mm (1/4″) Dia. Threaded Rod w/Dome End
$9.90 Add to cartLeft Handed M4 Threaded Rod at One End – Other End Dome Shaped.
-
3/4″ Dia. x 1-5/8″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 1/4″ thick panels/shelves)
$9.90 Add to cartMade of Aluminum with Satin Anodized Finish. The base is threaded to accept M6 Stud-Cap or Bolt.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ x 1-7/8″ EDGE-GRIP PANEL SUPPORT – Satin Clear Anodized Aluminum (w/Front Set Screw)
$9.90 Add to cartMade of Aluminum with Satin Anodized Finish. Includes Edge-Grip Support and Coupling Anchor.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
Acrylic/Plastic Cleaning Kit
$9.95 Add to cartCleaner & Polisher — cleans and brightens acrylic and all hard plastic surfaces. Leaves a shiny polished surface that resists dust and finger prints. Contains no abrasives or harsh chemicals.
-
Hook-on Acrylic Pocket – Landscape. Insert Size: Photo Format
Price range: $9.99 through $11.99 Select options This product has multiple variants. The options may be chosen on the product page1/8″ Clear acrylic folded holders / pockets. Designed to be used with horizontal 6mm rods mounted on walls or suspended on cables.
-
Hook-on Acrylic Pocket – Portrait. Insert Size: Photo Format
Price range: $9.99 through $11.99 Select options This product has multiple variants. The options may be chosen on the product page1/8″ Clear acrylic folded holders / pockets. Designed to be used with horizontal 6mm rods mounted on walls or suspended on cables.
-
SPIDER RING – QTY 20
$10.00 Add to cartSet of 20 (twenty) rings. Use with 1/32″ coated cables to give you instant height adjustability.
-
MULTI CLIP / CLEAR & BLACK – QTY 50
$10.00 Select options This product has multiple variants. The options may be chosen on the product pageSet of 50 (fifty) clips. Use with aluminum graphic holders or frames.
-
3/4″ Dia. x 1-5/8″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 3/8″ thick panels/shelves)
$10.10 Add to cartMade of Aluminum with Satin Anodized Finish. The base is threaded to accept M6 Stud-Cap or Bolt.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
1.5mm Cable with Top-Crimp – 8M (26′-2″) Long
$10.20 Add to cartUse as cable replacement for longer applications
-
SHELF SUPPORT DOUBLE – For shelves up to 10mm (3/8″) thick. (Use with 3mm Cables)
$10.20 Add to cartUse with 3mm Cable Hanging System to support acrylic and glass shelves up to 10mm (3/8″) thick.
-
WALL FIXING for 10mm (3/8″) Dia. Rods – Locks at any angle
$10.20 Add to cartIdeal for supporting wall mounted rod displays. Use with 10mm (3/8″) Dia. Rods (*not included). Projects rod from wall 28mm (1-7/64″). Locks at any angle.
-
SUPPORT w/SCREW-CAP – For 5-6mm (3/16″-15/64″) thick panels with holes. (Use with 6mm Rods)
$10.20 Add to cartUse for supporting signs and graphic panels 5-6mm (3/16″-15/64″) thick. Panel hole size diameter 6mm (15/64″). Use with 6mm (1/4″) Dia. Rod Suspensions.
-
SHELF SUPPORT SINGLE – For shelves up to 12.7mm (1/2″) thick (*Use with 3mm Stainless Cables)
$10.20 Add to cartUse with 3mm Stainless Steel Cable Hanging System to support acrylic and glass shelves up to 12.7mm (1/2″) thick.
