shelf supports
-
SHELF SUPPORT DOUBLE – For shelves up to 10mm (3/8″) thick (*Use with 3mm Stainless Cables)
$10.90 Add to cartUse with 3mm Stainless Steel Cable Hanging System to support acrylic and glass shelves up to 10mm (3/8″) thick.
-
SHELF SUPPORT DOUBLE – For shelves up to 10mm (3/8″) thick (*Use with 1.5mm Stainless Cables)
$12.90 Add to cartUse with 1.5mm Stainless Steel Cable Hanging System to support acrylic and glass shelves up to 10mm (3/8″) thick.
-
LOCKING SHELF SUPPORT for Drilled Shelves (*Use with 1.5mm Stainless Cables)
$6.90 Add to cartIdeal for supporting drilled or slotted acrylic and glass shelves. Hole Diameter – 12.7mm (1/2″). Use with 1.5mm (1/16″) Dia. Cables Suspensions in Stainless Steel Finish.
-
SHELF SUPPORT DOUBLE – For shelves up to 12.7mm (1/2″) thick (*Use with 1.5mm Stainless Cables)
Original price was: $12.90.$11.61Current price is: $11.61. Add to cartUse with 1.5mm Stainless Steel Cable Hanging System to support acrylic and glass shelves up to 12.7mm (1/2″) thick.
-
3/4″ Dia. x 7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 1/4″ thick panels/shelves)
Original price was: $6.39.$5.43Current price is: $5.43. Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
-
SUPPORT for Drilled or Slotted Shelf (*Use with 10mm Rod System)
$4.40 Add to cartUse for supporting drilled or slotted acrylic and glass shelves. Located under shelf. Hole Diameter – 12.5mm (1/2″). Use with 10mm (3/8″) Dia. Rod Display Systems
-
3/4″ Dia. x 1-1/16″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 3/8″ thick panels/shelves)
Original price was: $7.83.$6.26Current price is: $6.26. Add to cartMade of Aluminum with Satin Anodized Finish. Includes Standoff Support and Coupling Anchor.
-
3/4″ Dia. x 7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 3/8″ thick panels/shelves)
Original price was: $8.24.$6.18Current price is: $6.18. Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
-
SHELF SUPPORT SINGLE – For shelves up to 10mm (3/8″) thick. (Use with 10mm Rods)
Original price was: $10.90.$9.18Current price is: $9.18. Add to cartIdeal for supporting acrylic and glass shelves up to 10mm (3/8″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
11/16″ Dia. x 2-1/16″ PROJECTING STANDOFF SUPPORT – Satin Chrome (For 3/8″ thick panels)
$8.90 Add to cartMade of Solid Brass with Satin Chrome Finish. Includes Clamp Support, Standoff Base and Coupling Anchor.
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set (For 3/8″ thick panels/shelves)
$7.60 Add to cartMade of Aluminum with Satin Anodized Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
3/4″ Dia. x 1-5/8″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 1/4″ thick panels/shelves)
$9.90 Add to cartMade of Aluminum with Satin Anodized Finish. The base is threaded to accept M6 Stud-Cap or Bolt.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set / Stainless Steel (For 3/8″ thick panels/shelves)
$7.60 Add to cartMade of (#SS303) Stainless Steel with Brushed Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set / Stainless Steel (For 1/4″ thick panels/shelves)
$7.40 Add to cartMade of (#SS303) Stainless Steel with Brushed Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
SHELF SUPPORT DOUBLE – For shelves up to 10mm (3/8″) thick. (*Use with 10mm Stainless Rod System)
$12.80 Add to cartIdeal for supporting acrylic and glass shelves up to 10mm (3/8″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
5/8″ Dia. x 1-1/2″ PROJECTING SUPPORT for Wooden Shelves and Panels – Satin Chrome
$9.80 Add to cartMade of Solid Brass with Satin Chrome Finish. Includes Support, Standoff Base and Coupling Anchor.
-
3/4″ Dia. x 2″ PROJECTING STANDOFF SUPPORT w/BASE – Stainless Steel (For 1/4″ thick panels/shelves)
$21.30 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 3/8″ thick panels/shelves)
$12.70 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-7/8″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 1/4″ thick panels/shelves)
$10.90 Add to cartMade of Aluminum with Satin Anodized Finish. The base is threaded to accept M6 Stud-Cap or Bolt.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-7/8″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 3/8″ thick panels/shelves)
$11.10 Add to cartMade of Aluminum with Satin Anodized Finish. The base is threaded to accept M6 Stud-Cap or Bolt.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
