Home ❯ Basic Shipping Rate ❯ Page 61
Basic Shipping Rate
Showing 1201–1220 of 1737 resultsSorted by popularity
-
TOP/CEILING FIXING KIT with 10mm Rod – 0.5M (1′ 7-11/16”) Length
$28.95 Add to cartTop/Ceiling Fixing Kit with 10mm Rod — Includes RS-10 Top Fixing (1 ea) and RD10-0.5M/R 10mm (3/8″) diameter threaded rod with dome end (1 ea). Use for ceiling suspensions or wall projecting installations.
-
WALL-TO-WALL FIXING KIT with 10mm Rod and End Caps (Short Projection) – 1.5M (4′ 11-1/16”) Length
$62.00 Add to cartWall-to-Wall Rod Fixing Kit – Includes two RWF-10-25/SS Wall Fixings (2 ea), RD10-1.5M 10mm (3/8″) diameter threaded rod (1 ea), and REC-10/SS Decorative End Caps (2 ea). Use with wall-to-wall suspended applications. Supported rods project from wall 16mm (5/8″) on center.
-
WALL-TO-WALL FIXING KIT with 10mm Rod (Short Projection) – 1.0M (3’ 3-3/8”) Length
$41.70 Add to cartWall-to-Wall Rod Fixing Kit – Includes two RWF-10-25/SS Wall Fixings and RD10-1.0M 10mm (3/8″) diameter threaded rod. Use with wall-to-wall suspended applications (finish ends or cut rod to size). Supported rods project from wall 16mm (5/8″) on center.
-
CEILING-TO-FLOOR ADJUSTABLE ROD FIXING KIT with 10mm Rods – 4.5M (14’ 9”) Length
$161.00 Add to cartCeiling-to-Floor Adjustable Fixing Kit with 10mm Rods – Includes KCB-38 38mm Diameter Angle Base Support with Ball-Joint Swivel Coupling for Ceiling (1 ea), PSM-Collar Ring (1 ea), RCF-10/SS Top/Bottom Fixings with Spring Tensioner (1 ea), and RD10-1.5M 10mm (3/8″) diameter threaded rods (3 ea). Use with sloped ceiling-to-floor suspended applications — Join to 4.5M (14’ 9”) total height and cut to size on-site during installation. Use with Optional Base Support in 50mm diameter.
-
TOP/CEILING ADJUSTABLE FIXING KIT with 10mm Rod – 1.5M (4′ 11-1/16”) Length
$72.40 Add to cartTop/Ceiling Adjustable Fixing Kit with 10mm Rods – Includes KCB-38 38mm Diameter Angle Base Support with Ball-Joint Swivel Coupling (1 ea), PSM-Collar Ring (1 ea), RC-10/SS Top Fixing (1 ea), RD10-1.5M 10mm (3/8″) diameter threaded rod (1 ea), and REC-10/SS decorative end cap (1 ea). Use with sloped ceiling or angled wall suspended applications. Optional Base Support 50mm diameters are available.
-
3/4″ DIA. x 3/4″ SIGN STANDOFF – Stainless Steel / Black Oxide
$4.08Original price was: $4.08.$2.45Current price is: $2.45. Add to cartMade of Solid Stainless Steel #SS201 with Black Oxide Finish. Includes M10 Stud-Cap and Standoff Spacer/Barrel.
*Not recommended for outdoor use. These standoff supports are machined using stainless steel #SS201. For outdoor or other sensitive environments, please use stainless steel type 304 or 316 standoffs that have a higher corrosion resistance.
-
Acrylic Multi-Photo/Collage Frame with Non-Glare Holders – 3″ x 4″ Photo Display Board #KPHB-030
$280.74 – $576.65Price range: $280.74 through $576.65 Select options This product has multiple variants. The options may be chosen on the product pagePhoto Display Board with Standoffs and Laser-Cut Polished Edges – set of 1/4″ Acrylic Panel with Non-Glare Acrylic Holders for 3″W x 4″H Photo Inserts
Available in following grid-style configurations: 4 x 6 (24 inserts), 6 x 6 (36 inserts), and 6 x 8 (48 inserts).Use for displaying photographs or other interchangeable printed inserts. Provides a quick and easy way to change photos/information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick backboard of various finishes and 2-3mm (1/16″ – 1/8”) thick non-glare acrylic holders.
- Non-glare (non-reflective) acrylic front cover helps to reduce the glare and provides protection against harmful UV rays.
- Use with printed inserts up to 40 pt, or 1 mm (1/32″) thick.
- Panels are drilled for M10 studs.
- Optional photo/graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
INSERT SIZE OPTIONS: These frames are also available for 4″ x 6″ and 5″ x 7″ photo insert sizes – Display Kit #KPHB-040, Display Kit #KPHB-050
*Acrylic Frames and Display Boards are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Oversized Frameless Acrylic Frame – Poster Display Kit #KASP-420 / Clear Front
$660.39 – $838.10Price range: $660.39 through $838.10 Select options This product has multiple variants. The options may be chosen on the product pageFrameless Acrylic Poster Frames with Standoffs – set of 1/4″ and 1/8″ Clear Acrylic Panels with Laser-Cut Polished Edges.
Available in 42” x 84” and 48″ x 96″ panel sizes.Use for displaying extra-large/oversize photographs, graphics, maps, or other interchangeable printed inserts in either portrait or landscape orientation. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick non-glare acrylic front.
- Graphic/print insert size should be proportionally smaller to allow for at less 2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M8-10 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
- Minimal order requirement (MOQ) for this product is two (2) units.
DELUXE NON-GLARE OPTION: These frames are also available with 1/8″ non-glare front Poster Display Kit #KASP-425
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Panoramic Acrylic Frame – Poster Display Kit #KASP-215 / Non-Glare Front
$90.06 – $164.46Price range: $90.06 through $164.46 Select options This product has multiple variants. The options may be chosen on the product pagePanoramic Acrylic Poster Frames with Standoffs – set of 1/4″ Clear and 1/8″ Non-Glare Acrylic Panels with Laser-Cut Polished Edges.
Available in a few standard insert sizes with an aspect ratio of 2:1, 3:1, or 4:1Use for displaying panoramic / wide format posters, graphics, or other interchangeable printed inserts. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick non-glare acrylic front.
- Non-glare (non-reflective) acrylic front cover helps to reduce the glare and provides protection against harmful UV rays.
- Poster/graphic insert size should be proportionally smaller to allow for at less 1-1/2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M6 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
ECONOMY OPTION: These frames are also available with 1/8″ clear front Poster Display Kit #KASP-210
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Acrylic Collage Frame with Butted Graphic Panels / Display Kit #KASP-048
From: $556.88 Select optionsSupplied with 1/8″ thick clear back and 1/8″ non-glare front acrylic panels designed to take standard prints, posters, or graphics up to 135 gsm (1 mm, 1/32″) thickness. Optional graphic inserts printed on satin polyester base film are available.
-
Acrylic Collage Frame with Butted Graphic Panels / Display Kit #KASP-047
From: $514.66 Select optionsSupplied with 1/8″ thick clear back and 1/8″ non-glare front acrylic panels designed to take standard prints, posters, or graphics up to 135 gsm (1 mm, 1/32″) thickness. Optional graphic inserts printed on satin polyester base film are available.
-
50mm (2″) Dia. Base Support with Ball-Joint Swivel Coupling for Cables *Stainless Steel*
$30.60 Add to cartOptional Top/Bottom Base Support with Adjustable Angle Coupling for use with 1.5mm and 3mm diameter cable suspension sets (C100-2M/SS, C101-4M/SS, and C301-4M/SS). *Use for cable fixing sets in stainless steel finish only.
-
Easy Access Non-Glare Acrylic Holder – Expo Style / Portrait. Insert Size: 18″ x 24″ – 30″ x 40″ / QTY 4
$215.83 – $794.92Price range: $215.83 through $794.92 Select options This product has multiple variants. The options may be chosen on the product page1/8″ Non-glare acrylic folded holder designed to display large format prints and posters. Provides a quick and easy way to change information. Use with cable/rod suspensions or edge-grip wall mounts. Use as single or double sided info/poster display frame when suspended on cables/rods. / 4 PCS BUNDLE
*Acrylic Expo Styles Holders are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Easy Access Non-Glare Acrylic Holder – Expo Style / Portrait. Insert Size: 8.5″ x 11″ – 16″ x 20″ / QTY 6
$133.52 – $301.72Price range: $133.52 through $301.72 Select options This product has multiple variants. The options may be chosen on the product page1/8″ Non-Glare acrylic folded holder designed to display letter size prints, photographs, or information. Provides a quick and easy way to change information. Use with cable/rod suspensions or edge-grip wall mounts. Use as single or double sided info/poster display frame when suspended on cables/rods. / 6 PCS BUNDLE
*Acrylic Expo Styles Holders are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
DC2608 Recognition Wall Display with Acrylic Sandwich Frames for 11×17 Inserts (16FT WALL)
$2,566.78 – $2,789.26Price range: $2,566.78 through $2,789.26 Select options This product has multiple variants. The options may be chosen on the product pageRecognition Wall Display / Alumni Wall of Honor – a sophisticated and versatile display that elevates the presentation of achievements and information. This elegant solution incorporates premium acrylic sandwich frames designed to showcase 11″ x 17″ photo or info/poster inserts, mounted on a robust 10mm rod display system. Combining modern aesthetics with practical functionality, this display system is ideal for creating stylish interior photo or info/poster displays. Its versatility allows for seamless presentation of photographs, posters, or documents that require frequent updates, making it perfect for dynamic environments such as educational institutions, corporate offices, or public spaces. The system features high-quality materials that ensure both durability and visual appeal. *Select acrylic frame finish below.
Overall Display Size: 177″W x 52″H
Wall Size Requirements: 16 ft (192 in) WidePROJECT DETAILS & DOWNLOADS:
Follow the link below for additional details on DC2608 Recognition Wall Display- Concept Layout
- Wall Template
- Install Guide
*Acrylic Holders and Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
SEARCH BY KEYWORD/SKU
STORE CATEGORIES
- Specials & Promo Discounts
- ★ Clearance & Overstock Items
- Wall Display Ideas | Products
- Wall Displays | Project Details & Downloads
- Product Bundles | Bulk Savings
- Display Solutions & Design Ideas
- Display Systems & Installation Accessories
- Cable Display Systems
- Rod Display Systems
- Rail/Track Display Systems
- Sign & Panel Support Systems
- Aluminum Modular Display Systems
- Accessories for Cable/Rod & Rail
- Acrylic Products
- Signware Products & Accessories
- Hardware & Miscellaneous
- Other Products & Services


















