Satin Chrome
-
MULTI-POSITION TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
$13.40 Add to cartIdeal for supporting signs and graphic panels. For panels up to 7mm (1/4″) thick. Use with panels wider than the distance between cables. Use with 6mm (1/4″) Dia. Rod Suspensions.
IMPORTANT: Standard Set Screws (M6 x 0.7 x 8mm) included with RG12 supports can hold 3mm (1/8″) to 6mm (1/4″) thick substrates. To accommodate thiner or thicker substrates order suitable replacement Set Screws w/Teflon Tip.
-
MULTI-POSITION SUPPORT SINGLE for Wooden Shelves and Panels. (Use with 6mm Rods)
$14.20 Add to cartUse for supporting wooden shelves and panels. Adjustable to any angle. Can be locked into position. Use P08 Screw/Retainer with 6mm (15/64″) drilled glass shelves. Use with 6mm (1/4″) Dia. Rod Suspensions.
-
MULTI-POSITION SUPPORT DOUBLE – For panels/shelves up to 10mm (3/8″) thick. (Use with 3mm Cables)
$21.20 Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 10mm (3/8″) thick. Adjustable to any angle. Can be locked into position. Use with 3mm (1/8″) Dia. Cables Suspensions.
-
SUPPORT SINGLE for 6mm Rod (Use with 1.5mm Cables)
$4.90 Add to cartUse with 1.5mm Cable Hanging System to support hook-on acrylic holders, fabrics, banners or signs on horizontal rods.
-
SUPPORT for Drilled or Slotted Shelf (*Use with 10mm Rod System)
$4.40 Add to cartUse for supporting drilled or slotted acrylic and glass shelves. Located under shelf. Hole Diameter – 12.5mm (1/2″). Use with 10mm (3/8″) Dia. Rod Display Systems
-
Cable Suspended Glass Shelving Kit #KSI-003
From: $325.40 Select optionsSupplied with 1.5mm cable suspension hardware, shelf supports, and tempered glass shelves.
*Cable Suspension Kits with Acrylic Shelves are also available – #KSI-003PLEX.
-
1.5mm Double-Cable Assembly Suspension Kit with 150mm Wall Brackets and Floor Fixings – 3.0M (9′ 10″) Long
$194.20 Add to cartCable Suspension Set includes: Cables, Bottom Fixings, Spring Tensioners and Wall Brackets/Fixings with with 38mm (1-1/2″) Dia. Bases. Cable Projection from Wall – 38mm (1-1/2″). Back-to-Front Cable Distance – 150mm (5-7/8″). *Two Suspension kits are required for assembly of one shelf unit.
-
PANEL SUPPORT SINGLE – For panels up to 12.5mm (1/2″) thick (Use with 3mm Cables)
Original price was: $10.60.$9.54Current price is: $9.54. Add to cartUse with 3mm Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
SHELF SUPPORT SINGLE – For shelves up to 10mm (3/8″) thick. (Use with 10mm Rods)
Original price was: $10.90.$9.18Current price is: $9.18. Add to cartIdeal for supporting acrylic and glass shelves up to 10mm (3/8″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
SUPPORT FOR PANELS WITH HOLES DOUBLE – For panels up to 5-6mm (3/16″-15/64″) thick. (Use with 3mm Cables)
$9.80 Add to cartUse for supporting signs and graphic panels 5-6mm (3/16″-15/64″) thick. Panel hole size diameter 6mm (15/64″). Use with 3mm (1/8″) Dia. Cables Suspensions. *Supports for thicker panels are also available.
-
MULTI-POSITION SUPPORT DOUBLE – For panels/shelves up to 10mm (3/8″) thick. (Use with 10mm Rods)
$18.60 Add to cartUse for supporting glass shelves, sloped acrylic shelves or angled presentations. For panels/shelves up to 10mm (3/8″) thick. Adjustable to any angle. It can be locked into position. Use with 10mm (3/8″) Dia. Rod Suspensions.
-
SHELF SUPPORT SINGLE – For shelves up to 7mm (1/4″) thick (Use with 1.5mm Cables)
Original price was: $6.50.$5.20Current price is: $5.20. Add to cartUse with 1.5mm Cable Hanging System to support acrylic and glass shelves up to 7mm (1/4″) thick.
-
0.5M (1′ 7-11/16″) LONG 6mm (1/4″) Dia. Non-Threaded Rod
$6.80 Add to cartNon-Threaded Rod – Cut to any length
-
Frameless Acrylic Frame – Poster Display Kit #KASP-001 / Clear Front
Price range: $36.32 through $79.28 Select options This product has multiple variants. The options may be chosen on the product pageFrameless Acrylic Poster Frames with Standoffs – set of 1/8″ Clear Acrylic Panels with Laser-Cut Polished Edges.
Available in following standard insert sizes: 8” x 10”, 8.5″ x 11″, 11″ x 14″, 11” x 17”, 12″ x 18”, 14″ x 22”, 16″ x 20”, and 18″ x 18”.Use for displaying art, documents, certificates, photos, posters, or other interchangeable printed inserts in either portrait or landscape orientation. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 3mm (1/8”) thick clear back piece and 3mm (1/8”) thick clear acrylic front.
- Poster/graphic insert is surrounded by 1-1/4” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M4 studs. *Select standoff size (projection from wall) from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
DELUXE NON-GLARE OPTION: These frames are also available with 1/8″ clear front Poster Display Kit #KASP-005
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
SUPPORT w/SCREW-CAP – For 12.7mm (1/2″) thick panels with holes (Use with 1.5mm Cables)
$9.90 Add to cartUse for supporting signs and graphic panels 12.7mm (1/2″) thick. Panel hole size diameter 6mm (15/64″). Use with 1.5mm (1/16″) Dia. Cables Suspensions.
-
MULTI-POSITION SUPPORT for 10mm Rod (Use with 10mm Rods)
$9.80 Add to cartUse with 10mm (3/8″) Rod Suspension System to create angled presentations or support custom design fixtures.
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
Original price was: $14.90.$13.41Current price is: $13.41. Add to cartFor panels up to 7mm (1/4″) thick. Use with 6mm (1/4″) Dia. Rod Suspensions. Ideal for supporting acrylic pockets, signs and graphic panels from sides
-
1.5mm Cable Suspension Kit with Wall-to-Wall Fixings – 3.0M (9′ 10″) Long (Use with Interchangeable Base Supports)
Original price was: $40.40.$34.34Current price is: $34.34. Add to cartCable Suspension Kit includes: Cable, Spring Tensioner and Wall Fixings with 38mm (1-1/2″) Dia. Bases – Optional Base Supports in 25mm or 50mm diameter are available. Cable Projection from Wall – 38mm (1-1/2″).
-
MULTI-POSITION SUPPORT DOUBLE – For Wooden Shelves and Panels (Use with 3mm Cables)
$18.90 Add to cartUse for supporting wooden shelves and panels. Adjustable to any angle. Can be locked into position. Use P08 Screw/Retainer with 6mm (15/64″) drilled glass shelves. Use with 3mm (1/8″) Dia. Cables Suspensions.
