Hook-on Acrylic Poster Display Kit #KHPI-011

From: Original price was: $779.40.Current price is: $764.78.

Supplied with 1/8″ thick clear acrylic hook-on holders designed to take standard prints, posters, or graphics up to 135 gsm (1 mm, 1/32″) thickness. Optional graphic inserts printed on satin polyester base film are available.


Hook-on Acrylic Pocket – Portrait. Insert Size: Letter/Legal/Poster × 18

8.5" x 11"

Optional Printing Services

Posters & Graphics / Photographic Quality Prints on Satin Polyester Film. Sizes: 8.5" x 11" – 30" x 40" × 18

Printing Services for Poster Inserts (printed on satin polyester base film / single-sided).

Product Description

Cable Suspended Hook-on Acrylic Poster Display Kit for Windows

FIXING TYPE:
Cable/Rod Suspended – Ceiling to Floor (Up to 13 feet)

HARDWARE:
CA4 – Top/Bottom Fixings (3 ea)
R1500 –1.5m (4′ 11-1/16″) 1/4″ Dia. Rod (6 ea)
*** CUT ROD THREAD FOR END CAP TO FIT
CS09 – Rod Support (18 ea)
REC – Decorative End Cap (12 ea)

ACCESSORIES:
18HAP-8511P – Clear Hook-on Acrylic Poster Holder (18 ea)

AVAILABILITY: 5-10 Bus. Days (Fabrication and Delivery Time)

FINISHES: Mounting Hardware is supplied in a satin chrome finish as standard, other finishes on request. The Hook-on Acrylic Holders are made of high-quality 1/8″ thick clear acrylic.

CUSTOMIZATIONS: To customize your own Display Kit, please send us a short description or graphical attachment using our Quote Request Form. We custom fabricate Hook-on Holders in clear or non-glare acrylic in insert sizes up to 22″ x 28”. All custom orders are subject to a minimum order requirement.

INSTALLATION NOTES: Assembly required.

Attributes

Hook-on Acrylic Pocket – Portrait. Insert Size: Letter/Legal/Poster

Insert Format

Width

, ,

Load Option

Compatibility

Weight

, , ,

Mounting Options

Graphic Thickness

Material Thickness

Finish

Availability

,

Posters & Graphics / Photographic Quality Prints on Satin Polyester Film. Sizes: 8.5" x 11" – 30" x 40"

Print Size

Graphic Thickness

Compatibility

Finish

Availability

Cleaning & Handling of Acrylic Display Products

The number one problem with acrylic is the use of incorrect cleaners. Please never use cleaners containing ammonia, glass cleaners and furniture polish such as Fantastik, Tilex, Windex, or Clorox, they will all harm your new piece of acrylic. Use mild soap and water to clean acrylic products or only products specifically recommended for cleaning acrylic such as Craftics, Novus, or other Rated Anti-Static Cleaner & Polish for Plastics. Use micro-fiber disposable low lint cloths that are specially designed for cleaning acrylic and other plastic. Never use a dry cloth or your hand to clean your acrylic. Using the wrong cleaner can cause damage to acrylic products that can occur within minutes or be delayed weeks or even months. Repeated use of the wrong cleaners will weaken the structural joints and cause cracking to occur. Be careful during install, dropping your acrylic can cause cracking.

Product Limitations

Acrylic is not as rigid as glass or metals. Large, flat acrylic sheets, if insufficiently supported, may deform permanently due to continuous loads or even their own weight. Acrylic sheet can be used at temperatures from -30°F (-34°C) up to +190°F (+88°C), depending on the application. It is recommended that temperatures not exceed 160°F (71°C) for continuous service, or 190°F (88°C) for short, intermittent use. Components should not be exposed to high heat sources such as high wattage incandescent lamps, unless the finished product is ventilated to permit the dissipation of heat. Acrylic sheet is a combustible thermoplastic. Precautions should be taken to protect this material from flames and high heat sources.

Acrylic/Plastic Cleaning KitAcrylic/Plastic Cleaning Kit

Cleaner & Polisher — cleans and brightens acrylic and all hard plastic surfaces. Leaves a shiny polished surface that resists dust and fingerprints. Contains no abrasives or harsh chemicals. Cleans, glazes, and eliminates static charge all in one operation. Recommended for: Acrylic, Plexiglass, Lexan, Vinyl, Glass, and all hard plastics. Use disposable or reusable cleaning cloths.

Install Guide

How to Install Acrylic Hook-on Displays on Horizontal Rods ❯ DOWNLOAD PDF HERE

More Installation Instructions are available at the Installation Guides / Download Pages. You may search for correct install guides by item code, component SKU, or product description. If you can’t find the correct guide contact us by email – General Inquires & Questions.

SEARCH BY KEYWORD/SKU

STORE CATEGORIES

Need a Custom Display?

Use this form to request an estimate for a bulk purchase, product customization, or for a display kit modification…

Buying for Resale?

Register for a reseller account and save 25% or more if qualified. Requires online account registration and maintenance, online purchasing and order tracking…

Clearance & Overstock

Visit our Overstock Store and save big on excess inventory, discontinued products, or other great deals and markdowns. All overstock items are available only in limited selections and quantities...
Scroll to Top