rod fixings
-
WALL FIXING FOR 6mm (1/4″) DIA. RODS – Locks at any angle
$8.60 Add to cartIdeal for supporting wall mounted rod displays. Use with 6mm (1/4″) Dia. Rods (*not included). Projects rod from wall 25mm (1″). Locks at any angle.
-
CEILING-TO-FLOOR ROD FIXING KIT for 10mm (3/8″) Dia. Rods
$25.40 Add to cartIncludes Top/Ceiling Fixing for right-hand M6 threaded rods and Bottom/Floor Fixing with Spring Tensioner. Use with 10mm (3/8″) diameter rods for ceiling-to-floor or tailored suspended applications (*not included).
-
WALL FIXING for 10mm (3/8″) Dia. Rods – Locks at any angle
$7.90 Add to cartIdeal for supporting wall mounted rod displays. Use with 10mm (3/8″) Dia. Rods (*not included). Projects rod from wall 28mm (1-7/64″). Locks at any angle.
-
CEILING-TO-FLOOR ROD FIXING KIT for 6mm (1/4″) Dia. Rods
$21.20 Add to cartIncludes Top/Ceiling Fixing for left-hand M4 threaded rods and Bottom/Floor Fixing with Spring Tensioner. Use with 6mm (1/4″) diameter rods for ceiling-to-floor or tailored suspended applications (*not included).
-
TOP/CEILING FIXING for 6mm (1/4″) Dia. Rods – Screw Fit
$6.40 Add to cartIncludes Top Fixing with base support for left-hand M4 threaded rods. Use with 6mm (1/4″) diameter rods for ceiling suspensions or wall projecting installations (*not included).
-
CEILING-TO-FLOOR ROD FIXING KIT (*Use with 10mm Stainless Rod System)
$25.60 Add to cartIncludes Top/Ceiling Fixing with standard base support for right-hand M6 threaded rods and Bottom/Floor Fixing with Spring Tensioner. Use with 10mm (3/8″) Diameter Rod Suspensions in Stainless Steel Finish for ceiling suspensions or wall projecting installations (*not included). Optional base supports in 25mm, 38mm or 50mm diameters are available.
-
TOP/CEILING FIXING FOR 10mm (3/8″) DIA. RODS – Screw Fit
$6.90 Add to cartIncludes Top Fixing with base support for right-hand M6 threaded rods. Use with 10mm (3/8″) diameter rods for ceiling suspensions or wall projecting installations (*not included).
-
TOP/CEILING FIXING for 10mm (3/8″) Dia. Rods – Screw Fit (*Use with 10mm Stainless Rod System)
$8.40 Add to cartIncludes Top Fixing with standard base support for right-hand M6 threaded rods. Use with 10mm (3/8″) Diameter Rod Suspensions in Stainless Steel Finish for ceiling suspensions or wall projecting installations (*not included). Optional base supports in 25mm, 38mm or 50mm diameters are available.
-
WALL FIXING for 10mm (3/8″) Dia. Rods / Long – Locks at any angle
$8.40 Add to cartIdeal for supporting wall mounted rod displays. Use with 10mm (3/8″) Dia. Rods (*not included). Projects rod from wall 50mm (2″). Locks at any angle.
-
FIXING FOR 10mm (3/8″) DIA. RODS – Push Fit with Grab Screw
$8.00 Add to cartIncludes Standard Push Fit Fixing
-
FIXING FOR 6mm (1/4″) DIA. RODS – Push Fit with Grab Screw
$7.60 Add to cartIncludes Standard Push Fit Fixing. Use with 6mm (1/4″) Dia. Non-Threaded Rods (*not included). Not recommended for ceiling-mounted applications.
-
WALL FIXING for 10mm (3/8″) Dia. Rods (*Use with 10mm Stainless Rod System)
$8.20 Add to cartIdeal for supporting wall mounted rod displays, signs, or other applications. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish. Includes Wall Plug and Wall Coupling Cap. Supported rods project from wall 25mm (1″) on center.
-
WALL FIXING / SHORT for 10mm (3/8″) Dia. Rods (*Use with 10mm Stainless Rod System)
$7.40 Add to cartIdeal for supporting wall mounted rod displays, signs, or other applications. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish. Includes Wall Plug and Wall Coupling Cap. Supported rods project from wall 16mm (5/8″) on center.
-
WALL FIXING FOR 6mm (1/4″) DIA. RODS / LONG – Locks at any angle
$9.40 Add to cartIdeal for supporting wall mounted rod displays. Use with 6mm (1/4″) Dia. Rods (*not included). Projects rod from wall 46mm (1-13/16″). Locks at any angle.
-
CEILING-TO-FLOOR ROD FIXING KIT with 10mm Rods – 3M (9’ 10”) Length
$101.60 Add to cartCeiling-to-Floor Fixing Kit with 10mm Rods – Includes RCF-10/SS Top/Bottom Fixings with Spring Tensioner (1 ea) and RD10-1.5M 10mm (3/8″) diameter threaded rods (2 ea). Use with ceiling-to-floor suspended application — Join to 3M (9’ 10”) total height and cut to size on-site during installation. Use with Optional Base Supports in 25mm, 38mm or 50mm diameters.
