1/4 thick
-
SHELF SUPPORT SINGLE – For shelves up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.50 Add to cartIdeal for supporting acrylic and glass shelves
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.40 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$8.90 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
TOP/BOTTOM SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$7.20 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
IMPORTANT: Standard Set Screws (M6 x 0.7 x 6mm) included with CG09 supports can only hold 6-7mm (1/4″) thick substrates. For thiner material such as 3mm (1/8″) order replacement M6 x 0.7 x 10mm Set Screws w/Teflon Tip
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 3mm Cables)
$8.60 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
SUPPORT w/SCREW-CAP – For 6-7mm (15/64”-1/4″) thick panels with holes (*Use with 1.5mm Stainless Cables)
$5.60 Add to cartIdeal for supporting signs and graphic panels
-
SUPPORT w/SCREW-CAP – For 5-6mm (3/16″-15/64″) thick panels with holes (Use with 1.5mm Cables)
$5.40 Add to cartIdeal for supporting signs and graphic panels
-
TOP PANEL SUPPORT – For panels up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.50 Add to cartIdeal for supporting overhead signs and graphic panels from top
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 10mm Rods)
$9.27 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick (*Use with 1.5mm Stainless Cables)
$6.48 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
TOP PANEL SUPPORT – For panels up to 10mm (3/8″) thick. (Use with 1.5mm Cables)
$6.45 Add to cartIdeal for supporting overhead signs and graphic panels from top
*THIS ITEM REPLACES THE OLD PART NUMBERS: C1P-07
-
VERTICAL SUPPORT SINGLE – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
$11.20 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
1/4″ Clear Acrylic Panel – with Holes for M8-10 Studs
$40.50 – $150.30 Select options1/4″ Clear acrylic graphic panel with polished edges – with holes for M8 Studs. *Always use with a matching front piece of 1/8″ non-glare acrylic.
*Acrylic Frames & Blanks are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (Use with 3mm Cables)
$10.20 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
MULTI-POSITION SUPPORT SINGLE – For panels/shelves up to 7mm (1/4″) thick. (Use with 3mm Cables)
$13.50 Add to cartIdeal for supporting glass shelves, sloped acrylic shelves or angled presentations
-
SUPPORT w/SCREW-CAP – For 5-6mm (3/16″-15/64″) thick panels with holes. (Use with 6mm Rods)
$10.20 Add to cartIdeal for supporting signs and graphic panels
-
SUPPORT w/SCREW-CAP – For 6-7mm (15/64”-1/4″) thick panels with holes (*Use with 3mm Stainless Cables)
$7.40 Add to cartIdeal for supporting signs and graphic panels
-
SHELF SUPPORT SINGLE – For shelves up to 7mm (1/4″) thick. (Use with 10mm Rods)
$8.42 Add to cartIdeal for supporting acrylic and glass shelves
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick (*Use with 1.5mm Stainless Cables)
$12.40 Add to cartIdeal for supporting acrylic pockets, signs and graphic panels from sides
-
SHELF SUPPORT DOUBLE – For shelves up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
$6.90 Add to cartIdeal for supporting acrylic and glass shelves
