Versa-Module Free-Standing Display Kit #KFMR-014

From: $735.18

Versa-Module Display Stand / MR Series comes with cable suspension hardware and two poster holders / portrait format.


Easy Access Acrylic Pocket – Portrait. Insert Size: Letter/Legal × 2

1/8" Clear acrylic folded holder designed to take standard small prints and posters

11" x 17"

Optional Printing Services

Posters & Graphics / Photographic Quality Prints on Satin Polyester Film. Sizes: 8.5" x 11" – 30" x 40"

Optional Printing Services for Poster Inserts, available in single or double-sided prints. Choose single-side or double-sided. (Posters printed on satin polyester base film).

Product Description

Versa-Module Display Stand / MR Series comes with cable suspension hardware and two poster holders / portrait format.

Floor Standing (Aluminum Frame / Single Section)

MR1100/72″/+D1 – Vertical Extrusion (2 ea)
PH1035/16″/L/C – Horizontal Extrusion (2 ea)
370-180 – Threaded End Cap for MR1100 (2 ea)
366-108 – Square Plastic Insert (2 ea)
625 RND12UNI – 12″ Dia. Round Floor Base (2 ea)
652 108 – Insert Block (2 ea)
PA8 – Toggle Fixing for Cables (4 ea)
CA4 – Cable Suspension Kit (2 ea)
CG03 – Panel Support Single (8 ea)

18EAAP-1117P – Acrylic Poster Holder (2 ea)
Insert Size: 11”W x 17”H

AVAILABILITY: 3-7 Bus. Days (Fabrication and Delivery Time)

FINISHES: Stand framing comes in anodized aluminum with cable suspension hardware in satin chrome finish and floor bases in silver vein/powder coat paint as standard. All accessories are made of high-quality clear acrylic.

CUSTOMIZATIONS: To customize your own Versa-Module Display Stand / MR Series Kit, please send us a detailed description or graphical attachment with expected time-line using our Quote Request Form.

INSTALLATION NOTES: Assembly required.


Easy Access Acrylic Pocket – Portrait. Insert Size: Letter/Legal

Insert Size



Load Option



, ,

Mounting Options

Graphic Thickness

Material Thickness



Posters & Graphics / Photographic Quality Prints on Satin Polyester Film. Sizes: 8.5" x 11" – 30" x 40"

Print Size

Graphic Thickness




Cleaning & Handling of Acrylic Display Products

The number one problem with acrylic is the use of incorrect cleaners. Please never use cleaners containing ammonia, glass cleaners and furniture polish such as Fantastik, Tilex, Windex, or Clorox, they will all harm your new piece of acrylic. Use mild soap and water to clean acrylic products or only products specifically recommended for cleaning acrylic such as Craftics, Novus, or other Rated Anti-Static Cleaner & Polish for Plastics. Use micro-fiber disposable low lint cloths that are specially designed for cleaning acrylic and other plastic. Never use a dry cloth or your hand to clean your acrylic. Using the wrong cleaner can cause damage to acrylic products that can occur within minutes or be delayed weeks or even months. Repeated use of the wrong cleaners will weaken the structural joints and cause cracking to occur. Be careful during install, dropping your acrylic can cause cracking.

Product Limitations

Acrylic is not as rigid as glass or metals. Large, flat acrylic sheets, if insufficiently supported, may deform permanently due to continuous loads or even their own weight. Acrylic sheet can be used at temperatures from -30°F (-34°C) up to +190°F (+88°C), depending on the application. It is recommended that temperatures not exceed 160°F (71°C) for continuous service, or 190°F (88°C) for short, intermittent use. Components should not be exposed to high heat sources such as high wattage incandescent lamps, unless the finished product is ventilated to permit the dissipation of heat. Acrylic sheet is a combustible thermoplastic. Precautions should be taken to protect this material from flames and high heat sources.

Acrylic/Plastic Cleaning KitAcrylic/Plastic Cleaning Kit

Cleaner & Polisher — cleans and brightens acrylic and all hard plastic surfaces. Leaves a shiny polished surface that resists dust and fingerprints. Contains no abrasives or harsh chemicals. Cleans, glazes, and eliminates static charge all in one operation. Recommended for: Acrylic, Plexiglass, Lexan, Vinyl, Glass, and all hard plastics. Use disposable or reusable cleaning cloths.

Installations Instructions

How to Install KFMR-014 Versa-Module Display Stand / MR Series ❯ DOWNLOAD THE PDF HERE.



Need a Custom Display?

Use this form to request an estimate for a bulk purchase, product customization, or for a display kit modification…

Buying for Resale?

Register for a reseller account and save 25% or more if qualified. Requires online account registration and maintenance, online purchasing and order tracking…

Clearance & Overstock

Visit our Overstock Store and save big on excess inventory, discontinued products, or other great deals and markdowns. All overstock items are available only in limited selections and quantities...
Scroll to Top