Totem Display Stand / Free-Standing Display Kit #KFRS-014

$453.30$490.53

Totem Display Stand / RS Series comes with rods, support fittings, oval base, two 11″x14″ poster holders / portrait format, and an acrylic and an acrylic dual tri-fold dispenser available in Single or Double Sided configurations.


Product Description

Totem Display Stand / RS Series comes with rods, support fittings, oval base, two 11″x14″ poster holders / portrait format, and an acrylic and an acrylic dual tri-fold dispenser available in Single or Double Sided configurations.

FIXING TYPE:
Floor Standing (10mm Dia. Stainless Steel Rods w/Oval Floor Base)

SINGLE-SIDED HARDWARE AND ACCESSORIES:
RS-10 – Rod Support (2 ea)
R1500-10 – 1.0m Long Rod (2 ea)
R500-10 – 0.5m Long Rod (2 ea)
REC-10 – End Cap for Rod (2 ea)
RG01-10 – Panel Support Single (12 ea)
ACS-625 OVAL 20 – 20″ x 8″ Oval Floor Base (1 ea)
P12BS – Screw Set for Base (2 ea)
18EAAP-1114P – Acrylic Poster Holder (2 ea), Insert Size: 11”W x 14”H
18ALD-2-3585P/12 – Acrylic Dispenser (1 ea), Insert Size: 3.5”W x 8.5”H (Tri-Fold)

DOUBLE-SIDED HARDWARE AND ACCESSORIES:
RS-10 – Rod Support (2 ea)
R1500-10 – 1.0m Long Rod (2 ea)
R500-10 – 0.5m Long Rod (2 ea)
REC-10 – End Cap for Rod (2 ea)
RG01-10 – Panel Support Single (8 ea)
RG14-10 – Panel Support Single (4 ea)
ACS-625 OVAL 20 – 20″ x 8″ Oval Floor Base (1 ea)
P12BS – Screw Set for Base (2 ea)
18EAAP-1114P – Acrylic Poster Holder (2 ea), Insert Size: 11”W x 14”H
18ALD-2-3585P/12 – Acrylic Dispenser (2 ea), Insert Size: 3.5”W x 8.5”H (Tri-Fold)

AVAILABILITY: 3-7 Bus. Days (Fabrication and Delivery Time)

FINISHES: Stand supporting rods come in brushed stainless steel finish. The support components come in a satin chrome finish as standard, other finishes on request. The floor bases come in silver vein/powder coat paint as standard. All accessories are made of high-quality clear acrylic.

CUSTOMIZATIONS: To customize your own Totem Display Stand / RS Series Kit, please send us a short description or graphical attachment. All custom orders are subject to a minimum order requirement, please contact our sales representatives for more information at 800-753-9688.

INSTALLATION NOTES: Assembly required.

* Most small orders are shipped via UPS Ground. Large orders or oversize items will be palletized and shipped via motor freight. Additional Freight & Handling Surcharge may apply. We suggest ordering a few units at once in order to save on shipping cost.

We offer Multiple Unit Discounts (Mix & Match). Call 800-753-9688 for details.

Cleaning & Handling of Acrylic Display Products

The number one problem with acrylic is the use of incorrect cleaners. Please never use cleaners containing ammonia, glass cleaners and furniture polish such as Fantastik, Tilex, Windex, or Clorox, they will all harm your new piece of acrylic. Use mild soap and water to clean acrylic products or only products specifically recommended for cleaning acrylic such as Craftics, Novus, or other Rated Anti-Static Cleaner & Polish for Plastics. Use micro-fiber disposable low lint cloths that are specially designed for cleaning acrylic and other plastic. Never use a dry cloth or your hand to clean your acrylic. Using the wrong cleaner can cause damage to acrylic products that can occur within minutes or be delayed weeks or even months. Repeated use of the wrong cleaners will weaken the structural joints and cause cracking to occur. Be careful during install, dropping your acrylic can cause cracking.

Product Limitations

Acrylic is not as rigid as glass or metals. Large, flat acrylic sheets, if insufficiently supported, may deform permanently due to continuous loads or even their own weight. Acrylic sheet can be used at temperatures from -30°F (-34°C) up to +190°F (+88°C), depending on the application. It is recommended that temperatures not exceed 160°F (71°C) for continuous service, or 190°F (88°C) for short, intermittent use. Components should not be exposed to high heat sources such as high wattage incandescent lamps, unless the finished product is ventilated to permit the dissipation of heat. Acrylic sheet is a combustible thermoplastic. Precautions should be taken to protect this material from flames and high heat sources.

Acrylic/Plastic Cleaning KitAcrylic/Plastic Cleaning Kit

Cleaner & Polisher — cleans and brightens acrylic and all hard plastic surfaces. Leaves a shiny polished surface that resists dust and fingerprints. Contains no abrasives or harsh chemicals. Cleans, glazes, and eliminates static charge all in one operation. Recommended for: Acrylic, Plexiglass, Lexan, Vinyl, Glass, and all hard plastics. Use disposable or reusable cleaning cloths.

Installations Instructions

How to Install KFRS-014 Totem Display Stand / RS Series ❯ DOWNLOAD THE PDF HERE.

SEARCH BY KEYWORD/SKU

STORE CATEGORIES

Need a Custom Display?

Use this form to request an estimate for a bulk purchase, product customization, or for a display kit modification…

Buying for Resale?

Register for a reseller account and save 25% or more if qualified. Requires online account registration and maintenance, online purchasing and order tracking…

Clearance & Overstock

Visit our Overstock Store and save big on excess inventory, discontinued products, or other great deals and markdowns. All overstock items are available only in limited selections and quantities...
Scroll to Top