Stainless Steel Alloy
-
1.0M (3′ 3-3/8″) LONG 10mm (3/8″) Dia. Threaded Rod for Ceiling/Overhead Fixing
$16.14 Add to cartRight Handed M6 Threaded Rod. Rod comes with a male thread at one end and to be used with RS-10 ceiling/top fixing. Use for suspending signage or ceiling hanging shelves. *Not intended for use with ceiling-to-floor application that require joining multiple rods together.
-
PANEL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (*Use with 1.5mm Stainless Cables)
Original price was: $8.40.$6.72Current price is: $6.72. Add to cartUse with 1.5mm Stainless Steel Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
3/4″ Dia. x 2″ PROJECTING STANDOFF SUPPORT w/BASE – Stainless Steel (For 1/4″ thick panels/shelves)
$19.17 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
TOP/CEILING FIXING KIT with 10mm Rod – 0.5M (1′ 7-11/16”) Length
$30.45 Add to cartTop/Ceiling Fixing Kit with 10mm Rods – Includes RC-10/SS Top Fixing (1 ea) and RD10-0.5M/R 10mm (3/8″) diameter threaded rod with dome end (1 ea). Use for ceiling suspensions or wall projecting installations. Optional Base Supports in 25mm, 38mm or 50mm diameters are available.
-
1.5mm Cable Suspension Kit with Adjustable Angle Top and Standard Floor Fixings – 4.0M (13′ 1-1/2″) Long (*Stainless Steel)
$49.81 Add to cartCable Suspension Kit includes: Cable, Spring Tensioner and Adjustable Angle Top Fixing with 38mm (1-1/2″) Dia. Bases – Optional Base Supports in 50mm diameter are also available. Cable Projection from Wall – 65mm (2-1/2″).
-
SUPPORT w/SCREW-CAP – For 10mm (3/8″) thick panels with holes. (*Use with 10mm Stainless Rod System)
Original price was: $7.60.$6.84Current price is: $6.84. Add to cartUse for supporting signs, graphic panels, and decorative screens up to 10mm (3/8″) thick. Panel hole size diameter 7mm (1/4″). Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
CEILING-TO-FLOOR ROD FIXING KIT with 10mm Rods – 4.5M (14’ 9”) Length
$118.66 Add to cartCeiling-to-Floor Fixing Kit with 10mm Rods – Includes RCF-10/SS Top/Bottom Fixings with Spring Tensioner (1 ea) and RD10-1.5M 10mm (3/8″) diameter threaded rods (3 ea). Use with ceiling-to-floor suspended application — Join to 4.5M (14’ 9”) total height and cut to size on-site during installation. Use with Optional Base Supports in 25mm, 38mm or 50mm diameters.
-
3mm Cable Suspension Kit with Adjustable Angle Top/Bottom Fixings – 4.0M (13′ 1-1/2″) Long (*Stainless Steel)
$69.03 Add to cartCable Suspension Kit includes: Cable, Spring Tensioner and Adjustable Top/Bottom Fixings with 38mm (1-1/2″) Dia. Bases – Optional Base Supports in 50mm diameter are also available. Cable Projection from Wall – 65mm (2-1/2″).
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set / Stainless Steel (For 1/4″ thick panels/shelves)
$7.40 Add to cartMade of (#SS303) Stainless Steel with Brushed Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
SUPPORT DOUBLE for P07/SS Boss (*Use with 10mm Stainless Rod System)
Original price was: $8.90.$8.01Current price is: $8.01. Add to cartUse with 10mm Rod Suspension System in stainless steel finish to support wood panels and shelves, display cases, or clothing/hanging rails.
-
VERTICAL SUPPORT DOUBLE – For panels up to 7mm (1/4″) thick. (*Use with 10mm Stainless Rod System)
Original price was: $11.30.$10.17Current price is: $10.17. Add to cartIdeal for supporting acrylic pockets, signs and graphic panels up to 7mm (1/4″) thick from sides. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
3/4″ Dia. x 2″ PROJECTING STANDOFF SUPPORT w/BASE – Stainless Steel (For 3/8″ thick panels/shelves)
$19.35 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
