Home ❯ Shop
Shop
Showing 541–560 of 1779 resultsSorted by popularity
-
Cable Suspended Glass Shelving Kit #KSI-033
From: $524.00 Select optionsSupplied with 1.5mm cable wall-to-wall suspension hardware, shelf supports, and tempered glass shelves.
*Cable Suspension Kits with Acrylic Shelves are also available – #KSI-033PLEX.
-
Cable Suspended Banner Presentation Display Kit #KBNP-005
From: $186.16 Select optionsSupplied with suspension hardware and snap-on aluminum banner/graphic holders in four (4) widths. Optional printed graphic banners are available on single-sided substrates.
-
PANEL SUPPORT SINGLE / NON REMOVABLE – For panels up to 7mm (1/4″) thick. (Use with 6mm Rods)
$7.20 Add to cartFor vertical panels up to 7mm (1/4″) thick. Use with 6mm (1/4″) Dia. Rod Hanging System to support acrylic pockets, signs and graphic panels from sides.
-
3/4″ DIA. x 1-1/2″ BRASS SIGN STANDOFF – ECONOMY / POLISHED CHROME
$5.22Original price was: $5.22.$3.13Current price is: $3.13. Add to cartMade of Solid Brass with Polished Chrome Finish. Includes M10 Stud-Cap, Standoff Spacer/Barrel and Coupling Anchor.
-
Oversized Frameless Acrylic Frame – Poster Display Kit #KASP-320 / Clear Front
$378.15 – $648.29Price range: $378.15 through $648.29 Select options This product has multiple variants. The options may be chosen on the product pageFrameless Acrylic Poster Frames with Standoffs – set of 1/4″ and 1/8″ Clear Acrylic Panels with Laser-Cut Polished Edges.
Available in 36” x 52”, 40” x 52”, 40″ x 58″, 42” x 56”, 44″ x 64″, and 48″ x 72″ panel sizes.Use for displaying oversize posters, graphics, or other interchangeable printed inserts in either portrait or landscape orientation. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick clear acrylic front.
- Poster/graphic insert size should be proportionally smaller to allow for at less 2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M8-10 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
- Minimal order requirement (MOQ) for this product is two (2) units.
DELUXE NON-GLARE OPTION: These frames are also available with 1/8″ non-glare front Poster Display Kit #KASP-325
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Countertop Acrylic Sneeze Guard / Freestanding – Supported with Acrylic Side Legs (on Center)
$241.21Original price was: $241.21.$205.03Current price is: $205.03. Add to cartCountertop Free-standing Clear Acrylic Sneeze Guard / Protection Shield for Offices and Stores.
Available in 24″ x 36″ screen size with top section bent. (*Custom sizes and configurations are available)
Our Sneeze Guards are lightweight, modular, easy to install, and have a modern design with a clean look. Use for counter, checkout, cashier, restaurant, buffet, and office work areas. Acrylic side legs and hardware are included. Specify the size of cut out if required.
-
Cable Suspended Easy Access Poster Display Kit #KPI-014
$196.40 – $487.42Price range: $196.40 through $487.42Original price was: $196.40 – $487.42Price range: $196.40 through $487.42.$196.40 – $460.95Price range: $196.40 through $460.95Current price is: $196.40 – $460.95Price range: $196.40 through $460.95. Select optionsSupplied with 1/8″ thick clear acrylic folded holders designed to take standard prints, posters, or graphics up to 135 gsm (1 mm, 1/32″) thickness. Optional graphic inserts printed on satin polyester base film are available.
-
PETG LINER IN MULTIPLE SIZES
$7.50 – $22.90Price range: $7.50 through $22.90 Select options This product has multiple variants. The options may be chosen on the product pageUse with most of our aluminum or plastic frames for graphics protection.
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set (For 3/8″ thick panels/shelves)
$7.60 Add to cartMade of Aluminum with Satin Anodized Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
CRIMP SLEEVES – QTY 100
$15.00 Add to cartSet of 100 (one hundred) crimps. Use with 1/32″ diameter cable.
-
PX6033 VERTICAL EXTRUSION
$85.79 – $143.74Price range: $85.79 through $143.74 Select options This product has multiple variants. The options may be chosen on the product pageAluminum extrusion
*Aluminum Modular Extrusions/Profiles & Accessories are Made-to-Order Only (punched, drilled, machined, cut, etc.) – Both standard and custom size profiles are cut to specified lengths when we process the order. All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
1.0M (3′ 3-3/8″) LONG 10mm (3/8″) Dia. Threaded Rod for Ceiling/Overhead Fixing
$32.90 Add to cartRight Handed M6 Threaded Rod. Rod comes with a male thread at one end and to be used with RS-10 ceiling/top fixing. Use for suspending signage or ceiling hanging shelves. *Not intended for use with ceiling-to-floor application that require joining multiple rods together.
-
Frameless Acrylic Frame – Poster Display Kit #KASP-020 / Clear Front
$285.92 – $398.12Price range: $285.92 through $398.12 Select options This product has multiple variants. The options may be chosen on the product pageFrameless Acrylic Poster Frames with Standoffs – set of 1/4″ and 1/8″ Clear Acrylic Panels with Laser-Cut Polished Edges.
Available in 24” x 48”, 30” x 40”, 31″ x 44″, and 36″ x 48″ panel sizes.Use for displaying large posters, graphics, or other interchangeable printed inserts in either portrait or landscape orientation. Provides a quick and easy way to change information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick clear back piece and 3mm (1/8”) thick clear acrylic front.
- Poster/graphic insert size should be proportionally smaller to allow for at less 2” clear border on all sides.
- Use with inserts up to 80 pt, or 2 mm (3/32″) thick.
- Panels are drilled for M8-10 studs. *Select standoff support’s finish type from the selection provided below.
- Optional graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
DELUXE NON-GLARE OPTION: These frames are also available with 1/8″ non-glare front Poster Display Kit #KASP-025
*Acrylic Frames are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
Hook-on Acrylic Info/Photo Display – Clear. Insert Size: 5″W x 7″H / 3 x 8 GRID
$471.84Original price was: $471.84.$401.06Current price is: $401.06. Add to cartRod Wall Mounted Hook-on Acrylic Display with 1/8″ clear acrylic holders. Use for displaying photos, graphics, or other interchangeable printed inserts. Provides a quick and easy way to change information. Rod supports and mounting hardware are included.
Insert Size: 5″W x 7″H
Overall Display Size: 48″W x 32″H / Configuration: 3 x 8 GRID
-
Acrylic/Plastic Cleaning Kit
$9.95 Add to cartCleaner & Polisher — cleans and brightens acrylic and all hard plastic surfaces. Leaves a shiny polished surface that resists dust and finger prints. Contains no abrasives or harsh chemicals.
-
Acrylic Multi-Photo/Collage Frame with Non-Glare Holders – 4″ x 6″ Photo Display Board #KPHB-040
$312.66 – $716.92Price range: $312.66 through $716.92 Select options This product has multiple variants. The options may be chosen on the product pagePhoto Display Board with Standoffs and Laser-Cut Polished Edges – set of 1/4″ Acrylic Panel with Non-Glare Acrylic Holders for 4″W x 6″H Photo Inserts
Available in following grid-style configurations: 4 x 4 (16 inserts), 5 x 5 (25 inserts), and 6 x 6 (36 inserts).Use for displaying photographs or other interchangeable printed inserts. Provides a quick and easy way to change photos/information. Standoff wall mounts and hardware are included.
- Supplied with 6mm (1/4”) thick backboard of various finishes and 2-3mm (1/16″ – 1/8”) thick non-glare acrylic holders.
- Non-glare (non-reflective) acrylic front cover helps to reduce the glare and provides protection against harmful UV rays.
- Use with printed inserts up to 40 pt, or 1 mm (1/32″) thick.
- Panels are drilled for M10 studs.
- Optional photo/graphic inserts printed on satin polyester base film are available – follow the links on “Add-ons Tab” below.
INSERT SIZE OPTIONS: These frames are also available for 3″ x 4″ and 5″ x 7″ photo insert sizes – Display Kit #KPHB-030, Display Kit #KPHB-050
*Acrylic Frames and Display Boards are Made-to-Order (MTO) – All sales are final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.
-
1″ x 1″ SIGN STANDOFF / LARGE 25 – Modular Standoff Support / Polished Chrome
$11.40 Add to cartMade of Solid Brass with Polished Chrome Finish. Includes M8 Stud-Cap, Standoff Spacer/Barrel and Coupling Anchor.
-
PANEL SUPPORT SINGLE – For panels up to 12.7mm (1/2″) thick. (*Use with 1.5mm Stainless Cables)
$8.60Original price was: $8.60.$6.02Current price is: $6.02. Add to cartUse with 1.5mm Stainless Steel Cable Hanging System to support acrylic pockets, signs and graphic panels from sides.
SEARCH BY KEYWORD/SKU
STORE CATEGORIES
- Specials & Promo Discounts
- ★ Clearance & Overstock Items
- Wall Display Ideas | Products
- Wall Displays | Project Details & Downloads
- Product Bundles | Bulk Savings
- Display Solutions & Design Ideas
- Display Systems & Installation Accessories
- Cable Display Systems
- Rod Display Systems
- Rail/Track Display Systems
- Sign & Panel Support Systems
- Aluminum Modular Display Systems
- Accessories for Cable/Rod & Rail
- Acrylic Products
- Signware Products & Accessories
- Hardware & Miscellaneous
- Other Products & Services



















