support for shelf
-
SHELF SUPPORT SINGLE – For shelves up to 7mm (1/4″) thick. (Use with 1.5mm Cables)
Original price was: $6.50.$5.85Current price is: $5.85. Add to cartUse with 1.5mm Cable Hanging System to support acrylic and glass shelves up to 7mm (1/4″) thick.
-
SHELF SUPPORT DOUBLE – For shelves up to 10mm (3/8″) thick. (Use with 3mm Cables)
Original price was: $9.30.$8.37Current price is: $8.37. Add to cartUse with 3mm Cable Hanging System to support acrylic and glass shelves up to 10mm (3/8″) thick.
-
SHELF SUPPORT SINGLE – For shelves up to 12.7mm (1/2″) thick. (Use with 3mm Cables)
$9.50 Add to cartUse with 3mm Cable Hanging System to support acrylic and glass shelves up to 12.7mm (1/2″) thick.
-
3/4″ Dia. x 7/8″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 1/4″ thick panels/shelves)
Original price was: $5.20.$4.16Current price is: $4.16. Add to cartMade of Aluminum with Satin Anodized Finish. The base is threaded to accept M6 Stud-Cap or Bolt.
-
SUPPORT for Drilled or Slotted Shelf (*Use with 10mm Stainless Rod System)
$3.90 Add to cartUse for supporting drilled or slotted acrylic and glass shelves. Located under shelf. Hole Diameter – 12.5mm (1/2″). Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
SUPPORT SINGLE for P02 Boss (Use with 10mm Rods)
Original price was: $6.40.$5.76Current price is: $5.76. Add to cartUse with 10mm (3/8″) Rod Suspension System to support wood panels and shelves, display cases, or clothing/hanging rails.
-
3/4″ Dia. x 7/8″ PROJECTING STANDOFF SUPPORT – Satin Clear Anodized Aluminum (For 3/8″ thick panels/shelves)
Original price was: $5.40.$4.32Current price is: $4.32. Add to cartMade of Aluminum with Satin Anodized Finish. The base is threaded to accept M6 Stud-Cap or Bolt.
-
SHELF SUPPORT DOUBLE – For shelves up to 10mm (3/8″) thick. (Use with 1.5mm Cables)
Original price was: $9.40.$8.46Current price is: $8.46. Add to cartUse with 1.5mm Cable Hanging System to support acrylic and glass shelves up to 10mm (3/8″) thick.
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set (For 1/4″ thick panels/shelves)
$7.40 Add to cartMade of Aluminum with Satin Anodized Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
SHELF SUPPORT SINGLE – For shelves up to 10mm (3/8″) thick. (*Use with 10mm Stainless Rod System)
Original price was: $8.90.$8.01Current price is: $8.01. Add to cartIdeal for supporting acrylic and glass shelves up to 10mm (3/8″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
SHELF SUPPORT DOUBLE – For shelves up to 12.7mm (1/2″) thick. (*Use with 10mm Stainless Rod System)
Original price was: $12.80.$11.52Current price is: $11.52. Add to cartIdeal for supporting acrylic and glass shelves up to 12.7mm (1/2″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
3/4″ Dia. x 7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 1/4″ thick panels/shelves)
Original price was: $5.40.$4.05Current price is: $4.05. Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
-
SHELF SUPPORT SINGLE – For shelves up to 12.7mm (1/2″) thick. (*Use with 10mm Stainless Rod System)
Original price was: $8.70.$7.83Current price is: $7.83. Add to cartIdeal for supporting acrylic and glass shelves up to 12.7mm (1/2″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
SUPPORT SINGLE for P07/SS Boss (*Use with 10mm Stainless Rod System)
Original price was: $4.95.$4.46Current price is: $4.46. Add to cartUse with 10mm Rod Suspension System in stainless steel finish to support wood panels and shelves, display cases, or clothing/hanging rails.
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set / Stainless Steel (For 3/8″ thick panels/shelves)
$7.60 Add to cartMade of (#SS303) Stainless Steel with Brushed Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set (For 3/8″ thick panels/shelves)
$7.60 Add to cartMade of Aluminum with Satin Anodized Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
3/4″ Dia. x 7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 3/8″ thick panels/shelves)
Original price was: $5.60.$4.20Current price is: $4.20. Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
-
SHELF SUPPORT DOUBLE – For shelves up to 10mm (3/8″) thick. (*Use with 10mm Stainless Rod System)
Original price was: $11.50.$10.35Current price is: $10.35. Add to cartIdeal for supporting acrylic and glass shelves up to 10mm (3/8″) thick. Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish.
-
3/4″ PROJECTING STANDOFF SUPPORT – Screw Cap Set / Stainless Steel (For 1/4″ thick panels/shelves)
$7.40 Add to cartMade of (#SS303) Stainless Steel with Brushed Finish. The clamp support is threaded at the base to accept the M6 Stud-Cap included in the set.
-
5/8″ Dia. x 1-1/2″ PROJECTING SUPPORT for Wooden Shelves and Panels – Satin Chrome
$7.80 Add to cartMade of Solid Brass with Satin Chrome Finish. Includes Support, Standoff Base and Coupling Anchor.
