Cable Suspended Partition with Colorless/Frosted Acrylic Panel (Two-Sides Frost)
$635.80 – $712.48
Supplied with 1/4″ thick Acrylic Panel in Colorless/Frosted Finish (1 ea), Cable Suspension Sets (2 ea), and Single-Sided Panel Supports (8 ea). Use as partition, room divider, decorative or privacy screen.
* Oversize-Fragile Items – ships palletized via motor freight. Purchase additional Add-on Sections to extend the screen to your desired width. Subject to product availability and minimum order quantity. We suggest to check availability and lead-time prior placing your order.
* Online Shipping Cost Valid Only for 48 Lower States. Call for freight costs to HI, AL, or Canada.
Supplied with 1/4″ thick Acrylic Panel in Colorless/Frosted Finish – Two Side (1 ea), Cable Suspension Sets (2 ea), and Single-Sided Panel Supports (8 ea). Use as partition, room divider, decorative or privacy screen. The panel surface textured is pleasant to the touch, robust and discretely light-diffusing. The shatter-resistant sheets are also resistant to fingerprints, scratches, smudges, and can be easily cleaned. *Purchase additional Add-on Sections to extend the screen to your desired width.
Suspended from Cables (Ceiling-to-Floor)
HARDWARE: C301-4M/SS – Top/Bottom Fixings & Cable Set (2 ea)
Cable Length – up to 13 feet (*To be cut/adjusted in place) CP301/SS – Panel Support Single Sided (8 ea)
AVAILABILITY: 10-15 Bus. Days (Fabrication and Delivery Time)
(*Subject to frosted acrylic panel availability)
FINISHES: Mounting Hardware is supplied in natural stainless steel finish as standard, other finishes such satin chrome are available on request.
CUSTOMIZATIONS: To customize your own Architectural Screen / Partition Kit, please send us a short description or graphical attachment. We custom fabricate cable/rod suspended partitions, wall mounted decorative screens, and room dividers using a variety of light-weight acrylic/plastic sheet material. All custom orders are subject to a minimum order requirement, please contact our sales representatives for more information at 800-753-9688.
INSTALLATION NOTES: Assembly required.
* Oversize Acrylic Partition Kits will be palletized and shipped via motor freight. Additional Freight & Handling Surcharge may apply. We suggest ordering a few units at once in order to save on shipping cost.
We offer Multiple Unit Discounts (Mix & Match). Call 800-753-9688 for details.
The number one problem with acrylic is the use of incorrect cleaners. Please never use cleaners containing ammonia, glass cleaners and furniture polish such as Fantastik, Tilex, Windex, or Clorox, they will all harm your new piece of acrylic. Use mild soap and water to clean acrylic products or only products specifically recommended for cleaning acrylic such as Craftics, Novus, or other Rated Anti-Static Cleaner & Polish for Plastics. Use micro-fiber disposable low lint cloths that are specially designed for cleaning acrylic and other plastic. Never use a dry cloth or your hand to clean your acrylic. Using the wrong cleaner can cause damage to acrylic products that can occur within minutes or be delayed weeks or even months. Repeated use of the wrong cleaners will weaken the structural joints and cause cracking to occur. Be careful during install, dropping your acrylic can cause cracking.
Acrylic is not as rigid as glass or metals. Large, flat acrylic sheets, if insufficiently supported, may deform permanently due to continuous loads or even their own weight. Acrylic sheet can be used at temperatures from -30°F (-34°C) up to +190°F (+88°C), depending on the application. It is recommended that temperatures not exceed 160°F (71°C) for continuous service, or 190°F (88°C) for short, intermittent use. Components should not be exposed to high heat sources such as high wattage incandescent lamps, unless the finished product is ventilated to permit the dissipation of heat. Acrylic sheet is a combustible thermoplastic. Precautions should be taken to protect this material from flames and high heat sources.
Acrylic/Plastic Cleaning Kit
Cleaner & Polisher — cleans and brightens acrylic and all hard plastic surfaces. Leaves a shiny polished surface that resists dust and fingerprints. Contains no abrasives or harsh chemicals. Cleans, glazes, and eliminates static charge all in one operation. Recommended for: Acrylic, Plexiglass, Lexan, Vinyl, Glass, and all hard plastics. Use disposable or reusable cleaning cloths.
How to Install Partition/Decor Panels with Cable Suspension Systems ❯ DOWNLOAD PDF HERE