Cable Suspended Acrylic Shelving Kit #KSI-006PLEX

$571.40$1,477.28

Supplied with 1.5mm cable suspension hardware: ceiling-to-floor cable fixings, cable clamp supports for shelves, and colorless clear acrylic shelves with polished edges. Use to display collectibles, promotional products, or lightweight merchandise.


*Acrylic Shelves are Made-to-Order (MTO) – All sales final, no returns, no exchanges. Please read our WebStore “Terms & Conditions Policy“.

Product Description

Cable Suspended Acrylic Shelving Display Kit #KSI-006PLEX

Supplied with clear acrylic shelves with laser-cut polished edges, in either 3/8″ (10mm) or 1/2″ (12.5mm) thick. Available in 14″ depth and 14″, 24″, or 36″ widths.

FIXING TYPE:
Suspended from Cables (Ceiling-to-Floor)

HARDWARE:
C101-4M – Top/Bottom Fixings & Cables (4 ea)
Cable Length – up to 13 feet (*To be cut/adjusted in place)
CS103 – Shelf Supports for 3/8″ (10mm) thick acrylic (24 ea)
-or-
CS105 – Shelf Supports for 1/2″ (12.5mm) thick acrylic (24 ea)

ACCESSORIES:
38ASH-*SIZE* – 3/8″ (10mm) thick Clear Acrylic/Plexiglass Shelves (6 ea)
-or-
12ASH-*SIZE* – 1/2″ (12.5mm) thick Clear Acrylic/Plexiglass Shelves (6 ea)

AVAILABILITY: 5-10 Bus. Days (Fabrication and Delivery Time)

FINISHES: Mounting Hardware is supplied in satin chrome finish as standard. Acrylic shelves are supplied in colorless clear finish as standard. Other finishes are available on request.

CUSTOMIZATIONS: We custom fabricate Acrylic Shelves in clear, green-edge, or frost acrylic finishes and in various thicknesses. For pricing on custom sizes and configurations please send us a sketch or detailed description with expected time-line using our Quote Request Form

INSTALLATION NOTES: Order and install only the acrylic shelf units that correspond to maximum load rate of displayed products. The permissible load for acrylic shelves is based on two-sided support, maximum load less dead weight of acrylic… (Permissible Loads Chart for Cable Suspended Acrylic Shelves)

Attributes

Shelf Size

, ,

Thickness

,

Mounting Options

Cable Length

Finish

,

Availability

Cleaning & Handling of Acrylic Display Products

The number one problem with acrylic is the use of incorrect cleaners. Please never use cleaners containing ammonia, glass cleaners and furniture polish such as Fantastik, Tilex, Windex, or Clorox, they will all harm your new piece of acrylic. Use mild soap and water to clean acrylic products or only products specifically recommended for cleaning acrylic such as Craftics, Novus, or other Rated Anti-Static Cleaner & Polish for Plastics. Use micro-fiber disposable low lint cloths that are specially designed for cleaning acrylic and other plastic. Never use a dry cloth or your hand to clean your acrylic. Using the wrong cleaner can cause damage to acrylic products that can occur within minutes or be delayed weeks or even months. Repeated use of the wrong cleaners will weaken the structural joints and cause cracking to occur. Be careful during install, dropping your acrylic can cause cracking.

Product Limitations

Acrylic is not as rigid as glass or metals. Large, flat acrylic sheets, if insufficiently supported, may deform permanently due to continuous loads or even their own weight. Acrylic sheet can be used at temperatures from -30°F (-34°C) up to +190°F (+88°C), depending on the application. It is recommended that temperatures not exceed 160°F (71°C) for continuous service, or 190°F (88°C) for short, intermittent use. Components should not be exposed to high heat sources such as high wattage incandescent lamps, unless the finished product is ventilated to permit the dissipation of heat. Acrylic sheet is a combustible thermoplastic. Precautions should be taken to protect this material from flames and high heat sources.

Acrylic/Plastic Cleaning KitAcrylic/Plastic Cleaning Kit

Cleaner & Polisher — cleans and brightens acrylic and all hard plastic surfaces. Leaves a shiny polished surface that resists dust and fingerprints. Contains no abrasives or harsh chemicals. Cleans, glazes, and eliminates static charge all in one operation. Recommended for: Acrylic, Plexiglass, Lexan, Vinyl, Glass, and all hard plastics. Use disposable or reusable cleaning cloths.

Install Guide

How to Install Acrylic Shelves with Cable Suspension Systems ❯ DOWNLOAD PDF HERE

More Installation Instructions are available at the Installation Guides / Download Pages. You may search for correct install guides by item code, component SKU, or product description. If you can’t find the correct guide contact us by email – General Inquires & Questions.


Safety Load Limits – permissible load for flat acrylic shelves is based on the shelf width, recommended safety load for cable suspension hardware, and deflection rate of acrylic (sagging under load) ❯ DOWNLOAD TABLE HERE

SEARCH BY KEYWORD/SKU

STORE CATEGORIES

Need a Custom Display?

Use this form to request an estimate for a bulk purchase, product customization, or for a display kit modification…

Buying for Resale?

Register for a reseller account and save 25% or more if qualified. Requires online account registration and maintenance, online purchasing and order tracking…

Clearance & Overstock

Visit our Overstock Store and save big on excess inventory, discontinued products, or other great deals and markdowns. All overstock items are available only in limited selections and quantities...
Scroll to Top