0 - $0.00
No products in the cart.

Special Item Configurations

Make a strong design statement by using one panel in front of another to create a double-depth sign. Can be achieved by joining two supports with PC31 Support Joiner/Panel Spacer to take a panel up to 6mm thick.

Create a double-sided standoff support to hold two sign panels at once by using an additional screw cap mounted onto the base of the support. Great for double-sided signs or signs and graphic panels that require a back screen.

Two-Part Standoff with M8/M10 Studs. With clean lines and a modern look these standoffs are great for mounting display panels and signage. Machined using stainless steel #SS201. Available in stock in satin brushed finish.

Our economy standoff supports are supplied as a two-part fitting with a standoff spacer/barrel and a front screw-cap. The screw caps/studs included with the standoff-set come with M8 and M10 threads that vary from standoff diameter, style and material.

Durable, high quality stainless steel standoff supports designed for interior and exterior use. Each set includes a standoff spacer/barrel, screw cap and wall anchor. Made of (#SS303) stainless steel with brushed finish. Ideal for supporting signs, graphic panels and acrylic poster frames.

Brass projecting standoff supports are supplied as a three-part fitting with a standoff spacer/barrel, a wall anchor and a front clamp support that can be adjustable to any angle of slope and locked into position.

Fix the support rod back to wall using RP rod support then cut rod to required length and attach it to a vertical suspended rod with RS05, or to a vertical suspended cable with CS05. Use only to stabilize the loaded cables or rods — not intended as a weight support structure.

Fix the support rod back to wall using RP-10 rod support then cut rod to required length and attach it to a vertical suspended rod with RS05-10, or to a vertical suspended cable with CS05. Use only to stabilize the loaded cables or rods — not intended as a weight support structure.

Most of our modular sign supports are supplied as a three-part fitting with a standoff spacer/barrel, a wall anchor, and a front screw-cap. The screw caps/studs included with the standoff-set come with M4, M6 and M8 threads that vary from standoff diameter, style and material.

Use WM11 or RS03 fixings to mount 6mm rods onto wall to create stylish interior signage and wall displays. Use with RG01 supports to hold panels between two horizontal rods, or with hook-on acrylic pockets — just insert your print and hook on in the desired position, easy to change for displaying all types of information.

The double-sided edge grip supports are designed to hold smaller size panels and signage that require continuity. They have the ability to secure panels from two sides eliminating the need of using additional mounting supports. Multiple panels can be butted closely together using a middle support only. No holes required.

Various accessories for supporting graphic panels, product shelves and custom display cases are available. Extrusions have at least one channel on the full length of the profile — this enables insertion of vertical panels and accessories such as shelf brackets, hinges, hanging rail supports, panel clamp supports, connectors, cable and rod fittings, standoff mounts, etc.

Accessories such as leveler-inserts, insert glides and casters are used with our vertical extrusions to provide floor support. Some extrusions and profile set-ups may require drilling, others can use standard inserts without additional preparation. Use with modular stands, showcases, kiosks, workstations, or cubicles.

Create a double-sided standoff support to hold two sign panels at once by using an additional screw cap mounted onto the base of the support. Great for double-sided signs or signs and graphic panels that require a back screen.

Attach your display and sign panels to exhibition profiles and channels using any of the few available toggles:
• PC01-Q quick fit toggle.
• PA8 toggle.
• PA9 toggle.

Customize your projecting standoff to be mounted onto drilled vertical panels. Great for shelves inside glass or acrylic showcases, dividers, graphic panels, or signage that require a back screen.

Durable and modular sign support system that enables unlimited design possibilities and mounting flexibility. Perfect solution for mounting signs, architectural plaques, logo and display panels, directories and other decorative applications.

Allows multiple panels to be butted closely together using just one standoff support centrally mounted instead of four. It can hold up to 1/4” thick panels or two pieces of 1/8” thick acrylic with a poster of graphic print sandwiched in between — without the need for drilling holes.

The integration of stainless steel modular standoffs, projecting supports, and 10mm rod suspension system with stainless steel components provides unmatched versatility when it comes to mounting signage, wall paneling, display fixtures, or other decor applications.

Scroll to Top