Stainless Steel Alloy
-
3/4″ Dia. x 2″ PROJECTING STANDOFF SUPPORT w/BASE – Stainless Steel (For 3/8″ thick panels/shelves)
$21.50 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 1/4″ thick panels/shelves)
$12.50 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-7/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 3/8″ thick panels/shelves)
$12.70 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-5/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 3/8″ thick panels/shelves)
$12.10 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
3/4″ Dia. x 1-5/8″ PROJECTING STANDOFF SUPPORT – Stainless Steel (For 1/4″ thick panels/shelves)
$11.90 Add to cartMade of (#SS304) Stainless Steel with Brushed Finish. The base is threaded to accept M6 Stud-Cap or Bolt. *Good for Outdoor Use.
*Key Advice — These are threaded fittings and may require additional rotational torque when securing onto the wall to reach the desired orientation
-
SUPPORT w/SCREW-CAP DOUBLE – For 6-7mm (15/64″-1/4″) thick panels with holes. (*Use with 10mm Stainless Rod System)
$16.90 Read moreUse for supporting signs, graphic panels, and decorative screens 6-7mm (15/64”-1/4″) thick. Panel hole size diameter 7mm (1/4″). Use with 10mm (3/8″) Dia. Rod Suspensions in Stainless Steel Finish. *Supports for thicker panels are also available.
-
1.5mm Cable with Top-Crimp – 8M (26′-2″) Long (*Stainless Steel)
$23.80 Read moreUse as cable replacement for overhead or ceiling-to-floor cable fixing kits.
-
1.5mm Cable with Top-Crimp – 4M (13′ 1-1/2″) Long (*Stainless Steel)
$15.90 Read moreUse as cable replacement for overhead or ceiling-to-floor cable fixing kits.
-
3mm Cable with Top-Crimp – 4.0M (13′ 1-1/2″) Long (*Stainless Steel)
$16.80 Add to cartUse as cable replacement for overhead or ceiling-to-floor cable fixing kits.
-
TOP/CEILING FIXING KIT with 10mm Rod – 0.5M (1′ 7-11/16”) Length
$28.95 Add to cartTop/Ceiling Fixing Kit with 10mm Rod — Includes RS-10 Top Fixing (1 ea) and RD10-0.5M/R 10mm (3/8″) diameter threaded rod with dome end (1 ea). Use for ceiling suspensions or wall projecting installations.
-
WALL-TO-WALL FIXING KIT with 10mm Rod and End Caps (Short Projection) – 1.5M (4′ 11-1/16”) Length
$62.00 Add to cartWall-to-Wall Rod Fixing Kit – Includes two RWF-10-25/SS Wall Fixings (2 ea), RD10-1.5M 10mm (3/8″) diameter threaded rod (1 ea), and REC-10/SS Decorative End Caps (2 ea). Use with wall-to-wall suspended applications. Supported rods project from wall 16mm (5/8″) on center.
-
WALL-TO-WALL FIXING KIT with 10mm Rod (Short Projection) – 1.0M (3’ 3-3/8”) Length
$41.70 Add to cartWall-to-Wall Rod Fixing Kit – Includes two RWF-10-25/SS Wall Fixings and RD10-1.0M 10mm (3/8″) diameter threaded rod. Use with wall-to-wall suspended applications (finish ends or cut rod to size). Supported rods project from wall 16mm (5/8″) on center.
-
CEILING-TO-FLOOR ADJUSTABLE ROD FIXING KIT with 10mm Rods – 4.5M (14’ 9”) Length
$161.00 Add to cartCeiling-to-Floor Adjustable Fixing Kit with 10mm Rods – Includes KCB-38 38mm Diameter Angle Base Support with Ball-Joint Swivel Coupling for Ceiling (1 ea), PSM-Collar Ring (1 ea), RCF-10/SS Top/Bottom Fixings with Spring Tensioner (1 ea), and RD10-1.5M 10mm (3/8″) diameter threaded rods (3 ea). Use with sloped ceiling-to-floor suspended applications — Join to 4.5M (14’ 9”) total height and cut to size on-site during installation. Use with Optional Base Support in 50mm diameter.
